"EL ES GROUP - galvanized Steel support Kromiss-Bis.

Galvanized steel tapered bearing type CS Steel tapered bearing type CS circular cross-section with a top diameter of 60mm (or 76mm) made of steel S235 thickness of 3mm (or 4mm). Design type CS are made of bent steel sheet welded longitudinal automatic welding. The supports are equipped with a square heel, which serves for installation of supports prepared on a block Foundation or anchor base Foundation. Support design protected against corrosion by hot dip galvanizing by dipping a support in a bath of molten zinc. Height: 3M; 3.5 m; 4 m; 4.5 m; 5 m; 6 m; 7; 8; 9; 10 m; 11 m; 12 m Galvanized steel octagonal support type OSL (OSH) Steel tapered bearing type OSL (OSH) octagonal cross-section with a top diameter of 60mm (or 76mm) made of steel S235 thickness of 3mm (or 4mm). Design type OSL (OSH) are made of bent steel sheet welded longitudinal automatic welding. The supports are equipped with a square heel, which serves for installation of supports prepared on a block Foundation or anchor base Foundation. Support design protected against corrosion by hot dip galvanizing by dipping a support in a bath of molten zinc. Height: 3.5 m; 4 m; 4.5 m; 5 m; 6 m; 7; 8; 9; 10 m; 11 m; 12 m Steel multifaceted lighting masts type CMPL (CMPH) Steel lighting masts CMPL (CMPH) are made of steel with a thickness of 4mm, bent in the form of a multi-faceted right cone. The trunk of the mast consists of one or two members telescopically connected by draping the top segment to the bottom. External and internal surface of the mast is protected from corrosion by hot dip galvanizing. The masts may be one or two doors that are intended for security guards. Height: 12m; 14m; 16; 18; 20. For detailed information, please go to our website: www.ls-group.prom.ua