Polyethylene pipe manufacturer

Polyethylene pressure pipes for water supply from PE 80, PE 100 Pipes with a diameter from 20 to 630mm SDR-11; SDR 13,6; SDR 17; SDR-21; SDR-26. Nominal working pressure of 6kg/cm2(0.6 MPa) up to 25 kg/cm2(2.5 MPa). Made from high density polyethylene, low-pressure class PA and PE100 and designed for transportation of water and other liquids, including for drinking water supply at a temperature of from 0° to 40°C. These pipes can also be used to transport compressed air and other gaseous substances to which the polyethylene is chemically resistant. Pipes manufactured according to TU U Century. 2.7-21547843.006-01 and meet the requirements of the international standard ISO4427. The quality management system for production of pipes meets the requirements of DSTU ISO 9001-2001 (certificate of the Institute of Metrology of measurement and control systems №UA 5.001.009 from 11.12.2002,) Pipe connection is done with the help of fittings depending on the selected installation method: butt welding, socket or mechanical connection. Polyethylene pipes for the supply of combustible gases from PE 80, PE 100 Pipe with a diameter of from 20 to 400 mm SDR11 / SDR 17,6 in straight segments of length up to 12 meters, coils and coils. Nominal working pressure: SDR11 pipes from - 6.0 kg/cm2(0.6 MPa), for pipes from SDR17,6 - 3.0 kg/cm2(0.3 MPa). These pipes can also be used to transport compressed air and other gaseous substances to which the polyethylene is chemically resistant. Pipes are made of high density polyethylene of low pressure PEHD class PA and PE100 and systems used in the supply of medium (0.005 to 0.3 MPa) and high pressure category II (0,3-0,6 MPa). Manufactured according to the standard DSTU B. C. 2.7-73-98 and comply with the requirements of ISO 4437. The quality management system for production of pipes meets the requirements of DSTU ISO 9001-2001 (certificate of the Institute of Metrology of measurement and control systems №UA 5.001.009 from 11.12.2002,) The color of the pipes black with yellow stripes or yellow. The connection of pipes is carried out by welding, a method of melt (polyfuse) material. Used types of welding: temperature resistant, joint and bell. Pipes PE100 can be used at working pressures up to 1.0 MPa factor of safety=2. The state standard for the manufacture of pipes of working pressure PE100 from 0.625 to 1.0 MPa is under development.