The equipment for processing of bulky waste concrete products (reinforced concrete)

Line for processing bulky waste concrete products (reinforced concrete)

Obukhov industrial company offers a range of equipment for the recycling of large concrete products, without pre-cutting. Substandard and damaged concrete and reinforced concrete constructions, overage, obtained during dismantling of construction sites, waste building materials after processing into building rubble secondary origin and reinforcing steel for scrap. The maximum dimensions of the processed products him.

Primary destruction of concrete products with the release valve is in the machine with the pressure. The unit press (machine press-destructive MPR-1500) has a fixed grate table, and the product is moved along the table to the press, which is the destruction of the structure to pieces up to 200 mm Powerful lever Gidropress the full width concrete products destroys the concrete and presses it through the bars, when this is released the valve. Advancing concrete products retry cycles press processed the entire panel.

Large concrete slabs, substandard loaded on the table press crane, a crane or other mechanism. The panel or part of a product, you must tie straps to put on the table.

Pieces of the destroyed concrete fall on the conveyor with a special tape that is protected against possible damage to the reinforcement rods. Above the pipeline is installed, the guard magnet to collect the remaining valves. Next, chunks of concrete the size 0-200 mm by means of an inclined conveyor to the crusher for secondary crushing, then the unit with a crash, where the sieving to the desired fractions of crushed stone.

Performance depends on the nature of the processed non-conforming characteristics. When processing normirovannih concrete waste it is 10 tons per hour, and when the processing sub-standard concrete products - 7 tons per hour.