Compressors Frascold",Italy.

The company FRASCOLD produces 72 model standard reciprocating compressors grouped into 10 series: A, B, C, D, F, Q, S, V, Z and W. These models of compressors volumetric performance throughout the range of 3.95 to 239 cubic meters/hour, and cooling capacity - the range of 0.2 to 280 kW (standard dimensions).Compressors equipped with electric engines covering a power range from 0.5 to 80 HP Compressors, depending on the series, have from 2 to 8 cylinders.

Each piston compressors FRASCOLD equipped (standard delivery):

• shut-off valves on the suction and delivery side;
• rubber isolation pad;
• electronic monitoring relays pressure;
• thermal protection of windings of the engine;
• electronic protection unit the compressor .

Compressors series V, Z, and W are standard equipped with:

• the lubrication pump and filter oil;
• control relay oil pressure;
• overheating sensor gas the discharge side.

All the compressors are provided (standard delivery):

• factory tests;
• full synthetic filling oil;
• preserving dry dressing nitrogen under pressure;
• anti-corrosion layer blue the enamel on the body.

In compressors of series A,B,C,D,F,Q and S lubrication occurs on the principle of centrifugal spraying of oil.In compressors of series V, Z and W the lubricant passes through the high pressure pump. Additionally piston the FRASCOLD compressors can be equipped with the following technical means - options (additional delivery depending on series compressor):

• the crankcase heater compressor;
• fans blowing unit cylinder heads;
• the unloading of the compressor motor when starting;
• unloading the compressor when start;
• regulation the performance of the compressor;
• the liquid injection system refrigerant R22 (Electromechanical and e);
• electronic pressure regulator oil;
• the temperature sensor injection gas;