Cultivators from 4 to 12 meters with a spring harrow and roller

The field cultivator wide CSM is designed for continuous cultivation for pre-treatment and steam cultivation plots. The frame design and the working bodies of the cultivator can be used to very efficiently and evenly to handle and align the layer of soil at a depth of from 5 to 13 cm For the highest quality alignment field and crushing lumps of earth cultivator is equipped with a spring harrow. The cross section of the tines spring harrows is 12 mm, the design of the cultivator can significantly increase the life of parts and components, which is extremely important when assessing the cost of servicing and repair. Non-stop spring mechanisms on the working bodies prevent breakage of the frame and damage to columns and arched feet when the clash in the land of rocks or limestone. Cultivator CSM performs several operations in one pass, thereby making it possible to achieve savings of combustive-lubricating materials, as well as savings in depreciation and operating time of the tractor. Three-section frame floating type and tandem wheel suspension allows to perfectly follow the contours of the field, avoiding gaps. Wide rasstanovka paws and increased ground clearance bodrunova space completely eliminate clogging by dirt residue. It is possible to complete advanced finishing roller with shock-absorbing system. The cultivator is designed so you can work at high operating speeds (up to 13 km/h), which allows to achieve better performance. The cultivator is available in different widths from 4 to 12 meters. Recommended tractor power 23-26 HP per 1 meter of working width of the cultivator.