Machine electric pipe cleaning Rems Cobra 22

Reliable machine for cleaning pipes and channels. Quick cleaning spirals. Convenient and reliable!

Pipe: ∅20 to 250 mm;
For spirals: ∅8, 16, 22, 32 mm;

All cables and tools applicable for other manufacturers.
REMS Cobra 22/32 - fast, clean pipe length up to 100m, fast rotation the spindle, the clamping system and complete the work spindle position for protection of the drive against water and dirt.

Quick cleaning spirals with nozzles

Quick and effective cleaning using spirals: 740 rpm for model REMS Cobra 22 and 520 rpm for REMS Cobra 32. Suitable for . Spirals are added if necessary to obtain a desired length: 70 m (REMS Cobra 22) or 100 m (REMS Cobra 32).

Performance

• Maintenance;
• The weight of the actuator only 19 kg and 24 kg for Cobra 22 and Cobra 32, respectively;
• Impact-proof plastic housing, stable legs with rubber caps;
• The clamping system, one-piece spindle for spiral protect the engine from dirt and water.

Spiral pipe cleaning

• Super flexible, suitable for the most narrow tubes;
• The t-shaped groove with a lock;
• Spiral type S to clean a very strong blockages.

Clamps for cables

Clips from reliable wear-resistant steel.

• For model REMS Cobra 22: spiral for cleaning without replacement clamp ∅16 and 22 mm available as optional extras: ∅8 mm, the cylinder adapter 22/8, built-in clamping tongs;
• For model REMS Cobra 32: spiral for cleaning without changing the clamping jaws ∅22 and 32 mm as an additional option: ∅16 mm cylinder adapter 32/8, built-in clamping tongs;

Drive

• Powerful compensatory engine 750/1050 W;
• Right and left turn;
• Full transfer of power to the engine by a belt transmission;
• End-to-end closed with a work spindle, a convenient lever that was used as a retainer.

Tools for cleaning pipes

Equipment for cleaning pipes are also suitable for similar machines from other manufacturers.