Bizator  /  Adverts  /  equipment and materials  /  for service

Yoke pneumatic TPO-250

Offer type: salePublished: 28.02.2015
Company:Zahidnij Al'yans
Seller:Lemeshko Taras
Phones:
Show phone
Write a message
Address:Ukraine, L'vivs'ka Oblast', Lviv

Traverse pneumatic axial TPO-250 is designed for lifting and moving in the transverse (to the pit) direction of the automobile and commercial vehicles when performing works by adjusting the angle of the camber and the toe-in, and also when doing other work, associated with repairs and maintenance the undercarriage of the car. This the product can be installed on any four-leg lifts or on viewing ditches, relevant sizes and designs. Traverse packaged by the manufacturer in a fully assembled. Traverse must to put on a traveling path, and when necessary, adjust the width gauge, then tighten safety screws. You can also adjust clearance, rearranging rollers up or down. Setting yoke in the desired location (under car), apply compressed air to the input valve (the valve should be in the closed position. After the traverse lifted the car on the necessary height to block the air supply valve, and insert the locking finger in the appropriate the hole on the lifting rod. Lowering car is in reverse order.

Technical features


Maximum capacity, t 2,5

Working air pressure, ATM 4-6

Maximum track width, mm 1100

Minimum track width, mm 770

Relative lifting height mm 250

The distance between the axes, mm 450

Own weight, kg 47