Triumph 6 stand for cleaning nozzles price

Triumph - 6 is designed for cavitation purification of electromagnetic injectors, removed from the fuel ramp. In further you can buy additional kit for contour cleaning nozzles.

Injector designed to to deliver small and the exact number fuel collector

engine and is electrically operated valve. Required the amount of fuel is calculated the vehicle control unit, which reads information from a variety sensors of the engine and calculates how many time to hold the nozzle in the open condition. Opening times may vary in the range 2...15 milliseconds. Then, clearly the measured portion of certain form is sprayed through the nozzle, the size of the which is very small, of the order of 0.002 inch.

The problem begins when different impurities and additives contained in fuel contaminate the injector. As a rule, this happens inside the injector body on the needle valve seat needle, atomizer, as well as in the filter basket. The layer of carbon 5 micron on the needle valve may limit the supply of fuel by 25%.

Chemical pollution and dirt in the fuel system also can clog the internal basket filter nozzles. In addition to the restrictions fuel, pollution change the shape of the spray nozzles. Because the spray is made with a tolerance in 0.00004 inches, any contamination critically affects the shape of the spray and instead accurate and correct spray you receive the torch of irregular shape, the leaks, which lead to incorrect fuel combustion, loss of power, and in generally affects the pickup car.

Features:

Qty seats injectors, PCs - 6

Resistance injectors, Om - 2...25

Time cleaning, minutes - 30

Voltage network / Hz - 220

Capacity General tank, ml - 700

Consumption cleaning liquid, ml - 80..150

Pressure in modes at. - 0...5

Overall dimensions (LxWxH), mm - 370 x 295 x 333

Weight, kg - 12

Warranty, months. - 24

Features:

• On the stand is checked resistance winding injectors, performance and mechanical properties when opening and closing of the electromagnetic valve.
• The cleaning time of 4 injectors is 10-15 min. flush fluid Flow - 100 ml,
• Automatic selection of working voltage depending on the resistance injectors
• The time dimension on-off nozzles with vibration transducer
• Powered by external compressor air supply.
• Output to clean the idle valve
• Comes with adapters for with non-separable blocks of nozzles and mono-injection"
• Count the number leaching
• Lights
• accounting leaching (formation Protocol washing for a client)