Stargun R-SB 50 manual welding extruder

Stargun R-SB 50 manual welding extruder

SCOPE
Extruders STARGUN can be used simultaneously with machines series SWM to perform the full range welding works on manufacturing of water treatment tanks, towers, smoke filtration and similar Extruders are particularly effective when used in confined the andperformance welding in hard to reach places.
Extruders STARGUN ideal for making small and structural elements (for example, ventilation systems, chemical capacity).

THE WELDING PARAMETERS
Dual temperature control to maintain the temperature as a rod, and air maximum a deviation of up to 2°C from the specified parameters. Therefore achieved permanent and high quality welding. Air supply can be set to a value of 350 l/min, which allows welding thick sheets of thermoplastics.

RELIABILITY
The company RITMO® has developed a special design drills with outstanding performance characteristics: service brush unit drills can be done in 10 times less than a similar items from other manufacturers. The drill is equipped with power the gearbox, which ensures high quality of functioning this site throughout the work cycle.

USABILITY
Installation of the built-in feed air significantly reduces the weight and bulkiness of the extruder that is critical for working in confined spaces. The design of the extruder is designed to provide the best view of the weld zone. Handle STARGUN has a swivel mechanism on 250° and allows the operator to choose the most comfortable position in depending on the conditions of work. Two powerful LEDs allow the operator to carefully monitor the extrusion process, and for the welding process, even in dimly lit places.

SPECIFICATIONS
Power Supply 230 V
Power consumption 4.4 kW
The diameter of the welding rod 4 - 5 mm
Performance

4,7 kg/h (4)

5.2 kg/hour (5)
Operating temperature 180 ... 260°C) Thickness of welded materials 8 ... 40 mm () () Materials PE, PP
DIMENSIONS (l x W x h)
Extruder 700 x 200 x 100 mm
WEIGHT
Extruder 9 kg