Mesh netting from the manufacturer to buy in Simferopol, wholesale, retail
Price: | 150 UAH |
Company: | NOVA |
Seller: | Gefko Dmitrij |
Phones: | 0662352018 Show phone |
Address: | Ukraine, Autonomous Republic of Crimea, Simferopol |
Under the order of any cell, the diameter of the wires, the height.
Manufacturing time is 1-2 days
Mesh netting is a kind of metal meshmade of wire using a special technology of weaving. The principle of making netting is that from a wire of circular cross section are flat spirals are intertwined, forming a sheet.
The quality of the coating mesh netting is divided into the following types:
- uncoated (black); PRICE: 150 UAH./roll cell 60*60
Black mesh netting is used for plaster, reinforcement, and other tasks where on the net will not have direct exposure to the environment. Because the wire without coverage is not galvanized and not covered with PVC, quickly covered the rust. As an option - uncovered mesh-netting can be painted every 2-3 years, then it is suitable for fencing of the territory. Often choose this option use the "black" wire netting, because its price is slightly lower than any other mesh - galvanized or primaryservername.
- galvanised; PRICE: 160grn./roll cell 60*60
Galvanized mesh netting is made of steel wire by coating of zinc. This mesh has a high corrosion resistance, and therefore more long lifetime. Moreover, it does not need additional staining. Our company in the production of applied galvanic method, you can more thoroughly acquainted with methods of galvanizing.
with polymer coating (PVC mesh). PRICE:gr./roll cell 60*60
Polymer coating not only protects the wire from atmospheric precipitation, but also gives it an attractive appearance. It should be noted, that polymer coating significantly increases the service life of the mesh (we give the warranty to 7 years), not afraid of cold, not fade in the sun and can be used in the conditions of the sea coast, where salt air quickly destroys the zinc coating.
Actually about PVC coating can say a lot. Although stands for polyvinyl chloride (as it is in itself cheap in production) in the mixture volume is about 60% everything else is additive (rather expensive) giving PVC desired properties. And here is when the magic really starts. Firstly unfair the manufacturer may simply save, to make marketable, but such mesh with PVC coating will last "until the first rain." Secondly, the factor the locality in which it is assumed operation Rabitz. For example, mesh with PVC coating produced in China, Turkey guaranteed to withstand long-term lower temperatures up to-2C, the mesh is manufactured in Italy to-8C (below their temperature does not fall). This allows you to save on expensive mixture to the grid. Well, for residents of Ukraine and Russia, this means that the first such coverage in the winter break and spring begins to rapidly corrode. Mesh manufactured NOVA long temporarily (over 3 months) can withstand temperatures of-25C and short-term (3-4 weeks) to-40C. With proud to say that the numbers are not on paper, the stability at these temperatures with our grid was the place to be. So often, mesh netting PVC coated a number of manufacturers not having the right supplements very quickly fade in the sun losing view.