Vacuum pump rotary

Rotary vane the vacuum pump is a rotary displacement pump with oil a seal. The pumping system consists of a housing, eccentrically installed rotor , vanes move radially under the force of the compression spring , and entry and exit . The exhaust valve has an oil seal. The inlet valve designed in the likeness of the vacuum-relief valve and at work always is in the open state. The working chamber located inside the enclosure. The rotor and blades divide the working chamber on two separate, different volume of the compartment. After turning of the rotor, the gas enters the extend the suction camera up until it will not overlap the second a blade. The gas inside the chamber is compressed until you reach the exhaust valve under the atmospheric pressure. In the case of the use of the gas ballast open the outer hole through which gas is discharged into the sealed chamber suction button located on the front side.

 

1.Case

2.The rotor

3.The blade

4.Input / output

5.The working chamber

6.Exhaust valve

 

 

 

 

 

 

 

 

 

 

 

Our the company offers the following rotary vacuum pumps:

 

- AID-1, AID-2, pump AID-1, vacuum pump AID-2, the blade of HADES

- ATC-10, the pump ATC-10, vacuum pump ATC-10 ATC blade-10,

- HB-1, pump HB-1, a vacuum pump HB-1, HB blades-1,

- DWN-1, pump DN-1, vacuum pump DVN-1 spatula DN-1,

- NWDO, the pump NUDO, vacuum pump NUDU spatula, NUDU

- CO-503, pump KO-503, vacuum pump KO-503, blades KO-503,

KO 505, the pump-TO-505, vacuum pump-TO-505, blades KO 505,

KO 510, the pump-TO-510, vacuum pump-TO-510, blades KO-510,

- NITR-240, pump NITR-240, vacuum pump NITR-240, blades NITR-240,

- BP-8/2,5, pump BP-8/2,5, vacuum pump BP-8/2,5, blades BP-8/2,5.

- NWO-90, the pump NWO-90, the vacuum pump NWO-90, blades NWO-90