Bizator  /  Adverts  /  equipment and materials  /  power engineering equipment  /  electric power stations equipment

The cylindrical two-stage, gear TO and ZN

Offer type: salePublished: 28.02.2015
Company:OOO 'Kompani Plazma'
Seller:Aleksandr
Phones:
Show phone
Write a message
Address:Ukraine, Kharkivs'ka Oblast', Kharkiv

(horizontal)
Work in the drives of various machines and mechanisms is to change the torque and speed. Conditions:
- work lasting up to 24 hours. a day or with periodic stops in continuous and intermittent modes, i.e., when variable loads with periodic stops, the load in one direction and reversible;
- speed high-speed shaft is not more Ob/min;
the rotation of the shaft in either direction;
- non-aggressive atmosphere, the atmosphere of the types I and II according to GOST 15150 if airborne dust is not more than 10 mg/m3;
climatic version - U1, U2, UZ, NF-4, T1, T2, TK and O4 according to GOST 15150
An example of a symbol
Gearbox CU-250-25-11-TO-U3, where:
- CU - type gearbox.
- 250mm - between the axial distance of the output stage;
- 25 - nominal gear ratio;
- 11 - Assembly;
To the fulfillment of the end of the output shaft;
- U3 - climatic version and location category.