Steam sterilizer GK-100-3 (machine) Ukraine
Offer type: salePublished: 20.01.2014
| Seller: |  Poltava Medikos |
| Phones: |  (095)609-61-86; (067)570-38-00 Show phone |
| Address: | Ukraine, Poltavs'ka Oblast', Poltava |
Sterilizer GK-100-3 is designed for sterilization of water and saturated steam under excessive pressures of medical products from metals, glass, rubber and other materials, exposure to vapor which does not cause changes in their functional properties.
Materials of construction
The exterior panels, sterilization chamber, the thermal protective casing of the door in contact with liquids and steam are made of high-alloy stainless steel and provide corrosion resistance sterilizer for the media saturated vapors of organic and inorganic acids, including chlorinated and resistance to mezhkristallicheskoy corrosion.
The main design features
1. The volume of the sterilization chamber, not less than 100 l, mm - inner diameter 400
- depth 830
2. The dimensions of the sterilizer mm - HH
3. the supply voltage, V/Hz 380/50(60)
4. Power consumption, kW,
5. Warm-up time of the sterilizer, min, not more than 35
The heaters are divided into two groups, eliminating the inertia of the set temperature, to provide a more accurate maintenance in the specified range of values, to reduce power consumption. Automatic pumping of water in the steam generator of the internal capacity of the drive, without stopping mode of sterilization. The control current of the pressure and temperature in the steam generator and the sterilisation chamber. The air supply system into the chamber through a bacterial filter cleaning with a check ability to 0.3 microns. Built-in cooling system steam at its discharge into the sewer. The system of protection against unauthorized opening of the door. Vacuum drying the objects to be sterilised. Mean time between failures is at least 3000 cycles.
The average life of not less than 10 years.
The term of the manufacturer's warranty of 24 months.
Specifications operating modes
The steam control system in the process of working sterilization modes produced semi-automatic method, using buttons and solenoid valves, without the use of manual ball valves.
The modes of sterilization:
1 mode (t°C - MPa - min): 121 (+1) - 0,11 (+0,02) - 20 (+2)
mode 2 (t°C - MPa - min): 126 (±1) - 0,14 (±0,02) - 10 (+2)
3 mode (t°C - MPa - min): 134 (±2) - 0,20 (±0,02) - 5 (+2)
Materials of construction
The exterior panels, sterilization chamber, the thermal protective casing of the door in contact with liquids and steam are made of high-alloy stainless steel and provide corrosion resistance sterilizer for the media saturated vapors of organic and inorganic acids, including chlorinated and resistance to mezhkristallicheskoy corrosion.
The main design features
1. The volume of the sterilization chamber, not less than 100 l, mm - inner diameter 400
- depth 830
2. The dimensions of the sterilizer mm - HH
3. the supply voltage, V/Hz 380/50(60)
4. Power consumption, kW,
5. Warm-up time of the sterilizer, min, not more than 35
The heaters are divided into two groups, eliminating the inertia of the set temperature, to provide a more accurate maintenance in the specified range of values, to reduce power consumption. Automatic pumping of water in the steam generator of the internal capacity of the drive, without stopping mode of sterilization. The control current of the pressure and temperature in the steam generator and the sterilisation chamber. The air supply system into the chamber through a bacterial filter cleaning with a check ability to 0.3 microns. Built-in cooling system steam at its discharge into the sewer. The system of protection against unauthorized opening of the door. Vacuum drying the objects to be sterilised. Mean time between failures is at least 3000 cycles.
The average life of not less than 10 years.
The term of the manufacturer's warranty of 24 months.
Specifications operating modes
The steam control system in the process of working sterilization modes produced semi-automatic method, using buttons and solenoid valves, without the use of manual ball valves.
The modes of sterilization:
1 mode (t°C - MPa - min): 121 (+1) - 0,11 (+0,02) - 20 (+2)
mode 2 (t°C - MPa - min): 126 (±1) - 0,14 (±0,02) - 10 (+2)
3 mode (t°C - MPa - min): 134 (±2) - 0,20 (±0,02) - 5 (+2)
