Table veterinary SVU-M
Offer type: salePublished: 20.01.2014
| Seller: |  Poltava Medikos |
| Phones: |  (095)609-61-86; (067)570-38-00 Show phone |
| Address: | Ukraine, Poltavs'ka Oblast', Poltava |
1. The purpose
1.1. Table veterinary SVU-M is designed for operative treatment of Pets
2. The device and principle of operation
2.2. The table is a modular design consisting of a stationary base, panels, levers, lifting / lowering of the panel and the hydraulic actuator, allowing the vertical movement of the panel with fixing the height selected.
2.3. The base of the table is mounted on four helical piers serving for panel mounting table level relative to the floor of the operating room.
On one of the pillars of the Foundation is swivel bracket with tape to install the tray, and is intended for collecting biological fluids, used material and other waste related operational cycle
2.4. The table top consists of a tubular frame with vertical posts, which are part of the lever vertical movement of the panel.
The plane lying in the form of a tray with low sides and bottom.
2.5. To prevent contact of the animal's body with body fluids during surgical manipulations, the table comes with a removable grate made of stainless steel.
2.6. For removal of biological fluids, the panel has the drain pipe with the hose located above the bottom tray. The design of the hose - corrugated, allowing to change its length.
2.7. The corners of the head of the panel are two swivel mount bracket tripod stand. The selected height swivel head tripod is fixed by means of screw terminals. In addition, under the panel along its long sides are tubular rod, designed for fastening of seat belts, locking the animal's body during operations.
2.8. The mechanism for lifting / lowering of the panel is located between the base and the table top and consists of a system of levers operated by a hydraulic drive. Bearing surface of the hydraulic drive is located on a rocking platform mounted on the base, and the push rod of the hydraulic actuator mounted on one of the rods connecting the rack base with a tubular vertical posts of the frame panel.
2.9. Management hydraulic - foot: repeatedly pressing the right foot pedal is the lift of the panel, by pressing the left pedal - smooth release (to stop lowering the bar, enough to remove his foot from the pedal).
3. Completeness.
3.1. Supplied with table includes:
3.1.1. The table Assembly, SVU-M - 1pc.
3.1.2. Kit:
- removable grating panel (gr.) - 1 piece
- tripod stand with swivel head - 1 piece
the bottom tray (gr.) - 1 piece
- screw supports (M 10) - 4 pieces
4. Specifications
4.1. Maximum load capacity, kg 120
4.2. Panel height above the floor level, mm
- minimum 645
- maximum 985
4.3. Panel size, mm (length X width) 1250 x 650
4.4 Lifting panel for one pedal, 6 mm
4.4. The dimensions of the table, mm 1250 x 750 x 1950
4.5. Weight, kg, not more than 68
4.6. The average service life, years 8
1.1. Table veterinary SVU-M is designed for operative treatment of Pets
2. The device and principle of operation
2.2. The table is a modular design consisting of a stationary base, panels, levers, lifting / lowering of the panel and the hydraulic actuator, allowing the vertical movement of the panel with fixing the height selected.
2.3. The base of the table is mounted on four helical piers serving for panel mounting table level relative to the floor of the operating room.
On one of the pillars of the Foundation is swivel bracket with tape to install the tray, and is intended for collecting biological fluids, used material and other waste related operational cycle
2.4. The table top consists of a tubular frame with vertical posts, which are part of the lever vertical movement of the panel.
The plane lying in the form of a tray with low sides and bottom.
2.5. To prevent contact of the animal's body with body fluids during surgical manipulations, the table comes with a removable grate made of stainless steel.
2.6. For removal of biological fluids, the panel has the drain pipe with the hose located above the bottom tray. The design of the hose - corrugated, allowing to change its length.
2.7. The corners of the head of the panel are two swivel mount bracket tripod stand. The selected height swivel head tripod is fixed by means of screw terminals. In addition, under the panel along its long sides are tubular rod, designed for fastening of seat belts, locking the animal's body during operations.
2.8. The mechanism for lifting / lowering of the panel is located between the base and the table top and consists of a system of levers operated by a hydraulic drive. Bearing surface of the hydraulic drive is located on a rocking platform mounted on the base, and the push rod of the hydraulic actuator mounted on one of the rods connecting the rack base with a tubular vertical posts of the frame panel.
2.9. Management hydraulic - foot: repeatedly pressing the right foot pedal is the lift of the panel, by pressing the left pedal - smooth release (to stop lowering the bar, enough to remove his foot from the pedal).
3. Completeness.
3.1. Supplied with table includes:
3.1.1. The table Assembly, SVU-M - 1pc.
3.1.2. Kit:
- removable grating panel (gr.) - 1 piece
- tripod stand with swivel head - 1 piece
the bottom tray (gr.) - 1 piece
- screw supports (M 10) - 4 pieces
4. Specifications
4.1. Maximum load capacity, kg 120
4.2. Panel height above the floor level, mm
- minimum 645
- maximum 985
4.3. Panel size, mm (length X width) 1250 x 650
4.4 Lifting panel for one pedal, 6 mm
4.4. The dimensions of the table, mm 1250 x 750 x 1950
4.5. Weight, kg, not more than 68
4.6. The average service life, years 8
