Sawing machine To 975 Professional FELDER (Austria)
Offer type: salePublished: 27.01.2015
| Seller: |  Andrej |
| Phones: |  (095) 825-15-10 Show phone |
| Address: | Ukraine, Kyiv Oblast', Kyiv |
Sold sawing machine To 975 Professional FELDER (Austria). Used 2012 (worked 30%)
The purpose of the machine:
• the exact format a scrap of chipboard panels, as coated and uncoated;
• the exact format pruning other materials;
• longitudinal or transverse sawing pieces of wood.
Design guide: "X-ROLL", heat treated rollers riding on a V-shaped hardened steel flat ground guides. Low contact stresses, virtually wear-free system.
System tilt the saw blade "Easy-Glide":
• high load
• change the angle without free running
• immune to dust.
• easy to maintain, does not require lubrication.
Technical characteristic:
• The length of the sliding table (cart) - 3200 mm
• The length of the transverse stop with two stops - 3200 mm
• Cutting height - 0-133 mm
• The length of the outrigger table (supporting) - 1500 mm
• Power of main saw motor 5.5 kW
• Speed main saw - 3500, 4500, 5500
• Scoring unit, 9000 rpm 1,1 kW
• Cutting width right - 1250 mm
• The size of the main saw - 250-375 mm
• The size of the scoring saw blade - H mm
• Configure basic saws vertically - electric with indicator with an accuracy of 0.1 mm
• Configure main blade tilt 0-45 degrees - electric with indicator with an accuracy of 0.1 degrees.
Price 7800 Euro
The purpose of the machine:
• the exact format a scrap of chipboard panels, as coated and uncoated;
• the exact format pruning other materials;
• longitudinal or transverse sawing pieces of wood.
Design guide: "X-ROLL", heat treated rollers riding on a V-shaped hardened steel flat ground guides. Low contact stresses, virtually wear-free system.
System tilt the saw blade "Easy-Glide":
• high load
• change the angle without free running
• immune to dust.
• easy to maintain, does not require lubrication.
Technical characteristic:
• The length of the sliding table (cart) - 3200 mm
• The length of the transverse stop with two stops - 3200 mm
• Cutting height - 0-133 mm
• The length of the outrigger table (supporting) - 1500 mm
• Power of main saw motor 5.5 kW
• Speed main saw - 3500, 4500, 5500
• Scoring unit, 9000 rpm 1,1 kW
• Cutting width right - 1250 mm
• The size of the main saw - 250-375 mm
• The size of the scoring saw blade - H mm
• Configure basic saws vertically - electric with indicator with an accuracy of 0.1 mm
• Configure main blade tilt 0-45 degrees - electric with indicator with an accuracy of 0.1 degrees.
Price 7800 Euro
