Painting with water veil TBS-3W
Offer type: salePublished: 29.01.2015
| Seller: |  Lizunova Tat'yana |
| Phones: |  +38(044)586-59-86 Show phone |
| Address: | Ukraine, Kyiv Oblast', Kyiv |
Water wall model TBS-3W ideal for users with medium or large volume of work.
The total pressure of 600 ÷700 PA;
Value (reading) differential pressure gauge 300÷400 PA; Standard voltage electric panel protection IP 54: 380 V - 50 Hz;
Pump: rated power 1,1 KW - 220 V - 50 Hz; submission 375 I/m; Lighting: 220 V - 50 Hz - IP 65;
Other auxiliary signals (differential pressure, light bulb, position sensor gun);
Filtration efficiency: 97% when using enamel, 92% in dry-painting
The capacity of the ink for each filter: about 9. 000 gr.
Filtering: the first stage occurs through the double water curtain; the second stage takes place in the filtration material is made of fiberglass. This system ensures that emissions are less than 3 mg/Nm3.
The cab design allows you later to use cartridges with activated charcoal.
Absorption: the average absorption rate: 0.5 m/sec. Noise level: very low due to the filtering material.
Lighting: lighting used dual lamp fluorescent lamp with protection IP66, illumination of working space - 400 Lux. Standard equipment: electrical panel, switch to lock the electrical panel; switch differential pressure measuring instrument optical level to control the level of permeability of the filter.
The standard delivery includes: Painting shower, fan, filter kit fiberglass; lamps; electric control panel; switch differential pressure measuring instrument optical level to control the level of permeability of the filter; a position sensor spray gun.
Powerful fan intrinsically safe version with an electric motor 2.2 kW (explosion engine - optional). High-performance fan intrinsically safe (engine class IP55), allows you to create increased air flow for more uniform spray paints and effective removal and treatment of waste. Ensuring high quality paint and safety.
The total pressure of 600 ÷700 PA;
Value (reading) differential pressure gauge 300÷400 PA; Standard voltage electric panel protection IP 54: 380 V - 50 Hz;
Pump: rated power 1,1 KW - 220 V - 50 Hz; submission 375 I/m; Lighting: 220 V - 50 Hz - IP 65;
Other auxiliary signals (differential pressure, light bulb, position sensor gun);
Filtration efficiency: 97% when using enamel, 92% in dry-painting
The capacity of the ink for each filter: about 9. 000 gr.
Filtering: the first stage occurs through the double water curtain; the second stage takes place in the filtration material is made of fiberglass. This system ensures that emissions are less than 3 mg/Nm3.
The cab design allows you later to use cartridges with activated charcoal.
Absorption: the average absorption rate: 0.5 m/sec. Noise level: very low due to the filtering material.
Lighting: lighting used dual lamp fluorescent lamp with protection IP66, illumination of working space - 400 Lux. Standard equipment: electrical panel, switch to lock the electrical panel; switch differential pressure measuring instrument optical level to control the level of permeability of the filter.
The standard delivery includes: Painting shower, fan, filter kit fiberglass; lamps; electric control panel; switch differential pressure measuring instrument optical level to control the level of permeability of the filter; a position sensor spray gun.
Powerful fan intrinsically safe version with an electric motor 2.2 kW (explosion engine - optional). High-performance fan intrinsically safe (engine class IP55), allows you to create increased air flow for more uniform spray paints and effective removal and treatment of waste. Ensuring high quality paint and safety.
