Lifters hydraulic motor TGM-1
| Price: | negotiated |
| Company: | Biglebedki |
| Seller: |  Martyinenko Aleksandr |
| Phones: |  +38057 780 19 94 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
The hydraulic tappets TGM series motor are designed to control shaft mechanisms with reciprocating and oscillating movement.
When power is off the pusher rod under the force of the controlled mechanism returns to original position.
Pushers TGM can be used in mines, dangerous on gas explosion and coal dust, the surface under the canopy in such conditions:
- ambient temperature from minus 40 to plus 45 °C;
- relative air humidity up to 100% at 35 °C;
- atmospheric pressure from 84 to 106 kPa (from 630 to 800 mm Hg);
- dust content up to 1600 mg/m ;
- vibration locations with a frequency of 5 to 120 Hz;
- maximaltemperatur of 0.25 mm at a frequency up to 45 Hz and the maximum the vibration acceleration of 20 m/s2 at a frequency of from 45 to 120 Hz.
Types of manufactured tappets, refer to "Technical data".
The principle of operation tappets TGM is to create a pressurization of the working fluid by rotation of gear 'pump, which does the moving of the rod pusher, when powering off the motor there is a return of stock under the action of congresa or controlled mechanism to its original position.
Mounting the pushers TGM is carried out by means of side hinge supports.
Design the pushers allow the possibility to operate both in vertical and in a horizontal position or any intermediate from 0 to 95 °C.
