Bronze bushing, bronze bushing
| Price: | 20 RUR |
| Company: | OOO Metallurgicheskij zavod AVALDA |
| Seller: |  Agalakov Dmitrij |
| Phones: |  +73433612310 Show phone |
| Address: | Russian Federation, Sverdlovskaya Oblast', Yekaterinburg |
Bronze bushings are manufactured to the highest standards of quality using our own laboratory and technical control Department. Bushings are produced in various parameters of the customer, including drawings. The size range from 20 mm to 1200 mm in diameter, and a length of 750 mm. In the production of bronze bushings, the technology of centrifugal casting, due to this the product turns out qualitative and stable. Cast metal has good density, crystalline structure, no slag and sinks, high wear resistance, as well as affordable. The sleeves are made of the following bronze alloys:
1) Casting standard БрОЗЦ12С5, Бр05Ц5С5, Бр04Ц4С17, Бр04Ц7С5, БрОЗЦ7С5Н1;
2) Casting a responsible destination BRAF, Бр010Ц2, Бр08Ц4, Brobst, БрО10С10, Бр05С25;
3) Deformable Broth 8-0,3, Brof 6,5-0,4, Brof 6,5-0,15, Broth 4-0,25, Brotze 4-3, Brotss 4-4-2,5;
4) and other alloys with impurities: for example with aluminum.
Bronze bushings are low fluidity due to the large interval of crystallization. For this reason, in bronze does not form concentrated shrinkage, and occurs scattered minor porosity. Linear shrinkage of the tin bronzes is very small and is 0.8% in the molding sand form and 1.4% in the casting in the mold. These properties facilitate the acquisition of the castings, which do not require high tightness.
Buy bronze bushing at wholesale price at a metallurgical plant UVALDA by phone +7-343-361-23-10 or order via email zavod@avalda.ru. Own production, quality assurance.
