Vibrating machine for screening of catalyst systems
| Price: | 450 000 UAH |
| Company: | OOO 'KB 'Intel' |
| Seller: |  Chernaya Ekaterina |
| Phones: |  +38(050)994-27-80 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Zhovti Vody |
Round vibrating screen (vibrating machine) AVRK-4 is a new development from the company KB Intel. This model represents chetyrehdverny vibration machine for the sieving of catalyst systems for the target fraction for reuse. This model is established on the basis of a single-engine high-frequency vibrating screens IVU-1.1200.4, with 4 working decks, with a diameter of 1200 mm each.
Technical data vibrating AVRK-4 are shown in the table below.
Round vibrating screen (vibrating machine) AVRK-4 is designed for screening of catalyst systems for the target fraction for reuse, and simultaneous selection of the dust and crumbs catalysts. The apparatus can be used for screening of different substances (classification of material), for example, sand, clay, bentonite etc.
The principle of operation of this shaker consists in the following. Flange motor vibrator in explosion-proof execution with the frequency of rotation of the unbalanced shaft 25 Hz, located in the longitudinal axis of vibration of the machine, below its center of mass, generates short pulses of force with a radial vector. These pulses provide a discrete movement of the sieve material at the surface of the sieves for the optimum helical path from the loading to the unloading location, large particles (oversize product), with simultaneous passage through the cell screening surfaces of fines (undersize).
As sifting surfaces using a woven mesh of stainless steel wire and perforated plate made of stainless steel. The sets of meshes and perforated plates generate several design options screening of catalyst systems for different factions. Depending on the material can be applied to meshes with different hole sizes. The cell size of the mesh of the main and additional is specified in the delivery completeness.
The body of the shaker is made of stainless steel. Therefore, this device for enhanced lifetime. Material work mesh: wire or expanded metal sheet of stainless steel. Working mesh of the shale shaker have increased service life and protection against clogging of the cells. Releasably connecting the housing parts AVRK-4 provide them with a reliable and tight pair, and, simultaneously, allow for the replacement of the ITA with a minimum working time.
The shaker is equipped with a flange motor vibrator made in Italy.
The AVRK-4 mounted on a wheeled frame to facilitate moving it between the technological positions. During operation, for safety and to avoid parasitic vibrations, the frame of the apparatus is fixed on a retractable screw supports.
Control apparatus of vibration is performed using a mobile remote control in explosion-proof execution.
The model of shale shaker AVRK-4 is bystrookupaemyh thanks to increased productivity and efficiency, and precision fractionation and reduction of losses of useful product.
Basic parameters of round vibrating AVRK-4:
Briefly list the advantages of this model shale shaker:
1. The possibility of using grids with different cell sizes
2. An increased service life of the mesh
3. Exchange of grids for the entire 10-15 minutes
4. Four screening surface (deck, decks) that will divide sieve material into fractions
5. Weatherproof and explosion-proof execution that allows you to use this vibrating sieve in a heavy production environment.
