Measuring transducer M1 Ш704
| Price: | 400 UAH |
| Seller: |  Lantrat Aleksandr |
| Phones: |  +380503522136 Show phone |
| Address: | Ukraine |
Measuring transducer (IP) is designed to convert the signal from the slide wire or potentiometric sensors into a unified signal DC About...5 mA or 4...20 mA or DC voltage Of 10 volts....
The Converter has the following modifications:
Ш704-M1 - ordinary performance;
Operating conditions: ambient temperature 0...60°C.
SP can be used in systems of control and regulation of technological processes in power, metallurgy, chemical, oil, gas and other industries.
SP manufactured for the needs of national economy and for export to countries with temperate and tropical climate (version TK according to GOST 15150-69, but for the ambient temperature...About 60°0.
The connection of each UI with slidewire or sweaty-lomatichesky sensor is a three wire communication line. The resistance of each wire of the communication line must be in the range of 0.1 to 5 Ohms and should not vary from each other by more than 10 %.
The input circuit has no galvanic connection between the output circuit and the power circuit.
SP has alarm open lines of communication, "OL" mode and "CONTROL".
SP has panel mounting designed for flush mounting in panel cutouts. The PI has a linear dependence of the output signal from the input.
Specifications
Accuracy class of 0.25. The range of variation in the impedance of the slide wire or potentiometric sensors 90...5000 Ohms. The settling time of the output signal of the transmitter no more than 0.5 s Power-AC: 220V, 240 V; frequency 50, 60 Hz. Power consumption is not more than 7-A.
Dimensions 60х160х350 mm. Weight 2.2 kg
In stock 8 PCs
