Purchase of illiquid compressor 2ВМ4-15/25СМ2

Compressor 2ВМ4-15/25СМ2 stationary, piston, crosshead, three-stage, reciprocating, water-cooled without lubrication of cylinders and seals. In installations of this type are used rings of self-lubricating composite materials.

The actuator is made from two-speed induction motor type А2К85/24-8/16УХЛ4 built into the frame of the compressor. In compressors without lubrication of cylinders oil system the pressure oil flow to the cylinders and sealing devices are not provided. The pistons of these compressors have the support and the split ring of self-lubricating material based on PTFE with different fillers.

The compressor is equipped with automatic protection and alarm functions for main parameters.

Specifications:

Gas compressed air

The frequency of rotation of the motor shaft, rpm 750-375

Volumetric capacity reduced to suction conditions, cubic meters per minute 15-7,5

Pressure ATM. abs.: Initial atmospheric

The final 25

The initial gas temperature deg. From -25...+35

The shaft power of compressor kW. 140/68

Cooling water consumption without limit when the temperature at the inlet of 25 degrees. S. (est.) l/min 64/36

Consumption of oil for lubrication of the cylinders, g/h -

The amount of oil filled in the frame of the compressor l 100

Weight of compressor, kg 4580

The motor

Type А2К85/24-8/16УХЛ4

Power, kW 160/75

Voltage, V 380

Installation

Weight as delivered, kg 5250

Overall dimensions, l x W x h/mm 4200/1670/2480