Designed to obtain and maintain inside the chamber stable temperature, necessary for carrying out bacteriological and serological studies in a clinical-diagnostic and sanitary-bacteriological laboratories, clinics and hospitals, research institutions and other healthcare institutions. Structurally, the thermostat consists of a housing, chamber, door, control unit. The case is a frameless construction made from sheet metal, the top of which includes a control unit, and inside the working chamber. The space between the housing and the chamber is filled with insulating material. Camera made of brass, rectangular in shape; its upper part is installed the temperature sensor. Inside the chamber there are two shelves. The front opening of the chamber is closed by a glass door that allows you to observe the process in the chamber without opening the door. Along its perimeter is attached a rubber gasket with a magnetic insert, which serves to seal. The opening of the housing closed metal door with seal.
Specifications
The temperature range in the operating mode,from 28 to 55
The error of the set temperature is not more than 0.25
Dimensions of working chamber, mm (depth, height, width) 400х500х395 the power consumed by the thermostat WA - 2500
Overall dimensions (length, width, height) (with legs) 545х528х1360
Weight, kg not more than 60
Power from AC network 220 V, 50 Hz
Time of operating mode setting, not more than 8 h
Continuous Autonomous operation, h not less than 500
In stock - 1pc.