Harrow rotary hoe with a solid frame BMR6000
Offer type: salePublished: 11.01.2018
| Price: | 139 000 UAH |
| Seller: |  Volkov Yaroslav |
| Phones: |  0678882238 Show phone |
| Address: | Ukraine, Zaporiz'ka Oblast', Zaporizhia |
Harrow is a mounted aggregation method and is used with tractors of class 2 and 1.4.
When the tractor starts to move, start spinning wheel hoes, while their teeth deep into the soil to a depth of 3-5 cm, destroying the surface crust. Due to the special design of the tooth, and its exit from the earth is the micro-explosion, so that, in the soil blown air.
Airborne nitrogen enters the soil and absorbed by plants that contributes to their development.
This technology eliminates the need for nitrogen fertilizers and switch to clean Baskerville cultivation.
In addition, this type of harrowing creates the perfect backdrop for the primary development of the root systems and other plants, produces mulching surface soil and destroys soil crust, while retaining moisture.
An important aspect when using rotary harrows is the fact that the damage to cultivated plants from its use is not more than 0,8-1%. For example, the damage from the use of other types of boron is at least 10-15%.
It should be noted that when using harrows-rotary hoes destroyed from 95% to 100% of the weeds under the skin. It is also important that this type of equipment is used at the stage of plant growth (2-3 leaves maize), when you can not use the teeth of the harrows, which allows to achieve an additional positive effect.
the effect of microexplosion on the ground (besides ripping) contributing to a sharp displacement of the upper layer of soil accumulated carbon dioxide and replacing oxygen with nitrogen from the air, greatly intensifying (increasing) soil biological processes and the accumulation (synthesis) of nitrogen and thereby leads to a full development of cultivated plants (one pass of the needle harrows equal to the soil nitrate in the amount of 100 kg/ha).
The advantages of our harrows:
- working bodies forged from steel 65G, hot;
- a lance-like fingers, made in the shape of a spoon;
- on each section for 2 sun dressed on the wheel hub;
- on each wheel - double row Podshipnik;
- axis into sections and pin made from steel 40X;
- sun riveted;
- beam 140*140mm, wall 8mm;
- weight more than 1000 kg.;
- bolt strength 8.8;
- silent blocks with a Zhiguli, softer and works better.
Specifications :
Aggregation method - hinged
Working section – 31 PCs.
The number of blades on one wheel – 16 PCs.
Is aggregated with tractors of class 1,4 – class 2 (for example, tractor MTZ-80)
Operating speed - 15 – 20 km/h
Working width – 6.0 m.
The performance - 100 ha/h
The attendants - 1 person.
Harrow directly from the manufacturer. Call us! (STRICTLY from 8:30 to 18:00) Or email at any time. boronazp@gmail.com
