Optimum TU 2004 V-lathe-metal lathe-cutting of optimum Maschinen that 2004 machine
Offer type: salePublished: 09.01.2020
| Price: | 1 300 EUR |
| Company: | Stanok.org - internet-magazin stankov |
| Seller: |  stanok.org stanok |
| Phones: |  +380981500024 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Optimum TU 2004 V
Price and availability check on the website the Machine org, or by phone
Screw-cutting lathe is designed for processing external and internal surfaces of small parts in various aspects of activities. Voltage is 220 volts with a low weight 65 kg, allows the use in any limited industrial areas, where there is a corresponding socket.
Original modern design of the lathe is powered by engine with capacity of 600 watts.
The main surfaces of the spindle made large kinematic precision, heat-treated and polished on grinding machines. Installation on high precision bearings and quality allow you to achieve the smoothness and precision of rotation and as a result reduction of radial runout to 0,009 mm.
The hole in the form of a cone Morse 3 allows securing a standard snap.
The application of the additional faceplate and 4 - jaw lathe Chuck, allows the machining of the eccentric parts and pieces are not cylindrical in shape.
The cartridge has a fence with a window, opening that enables the protection and the machine stops. Installed at a sufficient height that does not prevent the production of workpieces up to 200 mm the working area is closed by a transparent protective shield that protects from flying hot chips.
Gearbox has two speed ranges within 150 – 2500 rpm.
The inclusion of the lathe screw machine button is used for having protection from non-desirable inclusions. Emergency button is in a convenient location, triggered easily and quickly.
By using tuning your guitar changeable gears to cut metric and inch threads with different steps.
Cast bed lathe has prismatic guides, precision fabrication which allows you to smoothly move the main parts.
Twist the top of the caliper allows the processing of internal and external conical surfaces.
The expansion capabilities of the machine and the use of modern tool holders the cutting tool may change the usual quick change tool post SWH-AA for cartridge-under round and square tool holder type H and D.
Manual handling occurs by means of handles with limbs, power feed longitudinal feed lever is activated.
Machining of long workpieces up to 300 mm is processed with the help of tailstock. The tailstock has a Morse tapered hole 2 that allows you to set the tool axis and the center without additional equipment. For clamping tools with cylindrical shanks can be used with drill or collet chucks with a set of interchangeable collets.
Processing of elongated conical surfaces produced by offsetting the tailstock. Moving to a length of 65 mm is produced by using a flywheel with a dial and lock arm. Removal of vibration and deflection can be produced by application of the steady-rests moveable and not moveable.
Specifications Optimum TU 2004 V:
The Engine Is 600 W 220 V ~50 Hz
Height of centres 100 mm / 300 mm
Machining diameter (max) 200 mm
Spindle speed 120 — 3000 min-1
Spindle taper MK 3
Through spindle hole 21 mm
The stroke of upper carriage 55 mm
Move the transverse carriage 75 mm
Cone tailstock MK 2
Travel of tailstock sleeve 65mm
Range of longitudinal feeds 0,1/0,2 mm/Rev
Metric threads 0.5 to 3 mm/Rev
Thread inch 44 — 10 threads/inch
the height of the tool holder cutter (max) 12 mm
Dimensions l x W x h 830 x 396 x 355 mm
Weight 62 kg
Supplied Optimum TU 2004 V:
3-jaw lathe Chuck 100 mm
Resistant centers MK 2/3
Guard
Chip tray
4-POS. tool holder
A set of replacement gears
Service tool
The user manual
On all equipment warranty 1 year, provide services for warranty and post-warranty service.
