OPTImill MH 22V (230) milling machine for metal optimil MX 22V frezerny verstat optimum
Offer type: salePublished: 15.01.2020
| Price: | 2 160 EUR |
| Company: | Stanok.org - internet-magazin stankov |
| Seller: |  stanok.org stanok |
| Phones: |  +380981500024 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
OPTImill MH 22V (230) (Opti mil MX 22 in) milling machine for metal
Price and availability check on the website the Machine org, or by phone
Description OPTImill MH 22V (230):
Desktop milling machine for metal with electronic-continuously variable spindle drive.
The paper feed spindles are regulated with no backlash adjustable nuts of the spindle.
Stable dovetail guiding precision ground and scraper with adjustable wedges.
EMC filter class B (use in private households).
All guides are polished and noticeably cleaned (oil pockets for greasing)
Accurate processing.
Double row angular contact ball bearings in the axles, adjustable without backlash.
Protective electronics in execution on 24 volts.
Bellows as guide protection.
Right and left rotation of the spindle.
Forward / reverse operation.
Drilling and milling head tilts ± 90, for milling and drilling in any angular position.
Lamp.
Height-adjustable protective screen with micro switch against flying chips and parts for maximum user protection
Easy to read display of speed and depth display, switchable mm / inch.
Thin mikromatika flow.
Control electronics: integrated control relay
Engine: two-stage gear ratio for a powerful transmission of engine power; Powerful DC motor with permanent current control.
Z-stand and the X-axis: the groove for the next installation tape.
Control panel: convenient membrane keypad.
Easy-to-read digital speed display.
Stop switch of the impact of the emergency.
Power circuit: reliable cable wiring.
Tapered roller bearings: high concentration of ≤ 0,015 mm measured in the feather.
Column: reversible on both sides 30 mm; with swivel head is possible more long paths and Central processing of the workpiece.
Cross table: accurate surface finish with T-slots adjustable wedges adjustable via 3 hand wheel, the adjustable end stops.
The y-axis: the groove for the next installation tape.
Milling machine comply with the standard DIN EN 55011: class A.
Technical characteristics of the OPTImill MH 22V (230):
Length, mm 945 mm
Width, mm 650 mm
Height, mm 950 mm
Weight of machine, kg 120 kg
Power consumption of 0.95 kW
Supply voltage 230
Type of current ~
Supply frequency 50 Hz
Max. diameter of end milling cutter, mm 52 mm
Maximum end mill diameter, mm: 12 mm
The departure of the axis of the spindle, 170mm
The end of spindle BT 20
The spindle speed 90 — 3000 min-1
Number of speed ranges 2
Management of speed regulation electronic
Work table length 700 mm
Width of working table 180 mm
Distance vertical spindle — horizontal milling min. 370 mm
Distance vertical spindle — horizontal milling table 370 mm max.
The size of T-slot mm 12 mm
The number of T-slot 3
The distance between slots, mm 63 mm
Maximum table load, kg 50 kg
Axis travel X, mm 480 mm manually
Moving along the Y-axis, mm 175 mm manually
The Z-axis travel mm 370 mm manually
The maximum diameter of drilling in steel mm 20 mm
Maximum drilling diameter in steel mm 16 mm
Rotation ± 90°
Diameter of spindle sleeve mm 60 mm
The movement of the movable sleeve, mm 50 mm
All machines have a warranty period of 1 year. We provide warranty and post-warranty service.
