Optimum DX V Drill 17 drill press for metal tapping with verdolini verstat optimum drill deeks 17V

Optimum Drill 17 DX V (optimum drill d x 17 in) tapping drill press for metal svetlicinii verstat.

Table drilling machine for metal with smooth adjustment

Features OPTIdrill DX 17V:

• Worldwide famous manufacturer, the model for the European market.
• The function of tapping, steel, up to M8.
• Automatic selection of speed mode tapping when specifying material and diameter. And smooth the cut with the mode of tapping.
• Variable speed, smooth regulation of frequency of rotation of the spindle from the control panel.
• Wide range of speed of rotation of the spindle from the lower 50 rpm./mins to high 4000 rpm./min.
• The micrometric.
• Digital display.
• Aluminum pulleys and timing belt Gates.
• Quiet operation.
• Accurate. The largest runout ≤ 0.03 mm measured in the drilling spindle sleeve.
• Massive, 73 kg.
  
• Machine lamp. Illumination of the drilling area.
• Protection from water and dirt, and meets the standard DIN EN 55011: Class A.

Description Optimum Drill DX 17 V:

• Lightweight and precise aluminum pulleys drill rod during operation do not create additional vibrations.
• On the front of the control panel of the drilling machine conveniently located emergency STOP button.
• Drill rod DX 17V is mounted on accurate ball bearings.
• Adjustable height digital ruler with automatic disconnection of the motor/reverse speed.
• Membrane keypad high contrast, OLED display, is protected from dirt and liquids.
• Language: English, German, French, Russian on display.
• Digital starting point.
• In control panel, drill machine has a digital meter display rpm.
• Upon reaching the drilling depth, drilling machine OPTIdrill DX 17V beeps.
• The decrease in the rate mode box.
• Control of basic functions by means of four keys and a centrally located rotary switch.
• Control panel Siemens SINAMICS V20 applied to the model of the drilling machine DX 17V.
• Built-in led lamp on both sides of the spindle, for greater illumination of the working area.

Facilities management model OptiDrill DX 17V — automatically ensures the optimum speed for the tool:

• Specify the drill diameter.
• Identification of the material.
• The choice of modes of drilling.

Easy-to-read led display:

• Shows the spindle speed.
• Drilling depth (specified/actual).
• A count of the number of drilled holes.
• The selected tool and tool size.

Protective screen:

• Maximum possible protection of the user.
• Height adjustable.
• Micro switch blocking inclusion of the electric motor when you open the protective screen.

Drilling table:

• Precisely manufactured.
• Parallel T-shaped grooves.

Rigid table (base):

• Made of cast iron.
• With parallel T-shaped grooves.
• Accurately machined working surface of the table.

The package Optidrill DX 17V:

• Drill Chuck 1-13 mm

Specifications Optidrill DX 17V:

Длина425 ммШирина475 ммВысота980 mmWeight (net)73 kgmotor Power spindle1.0 kWElectric напряжение230 In фаз1 Rakosi type of current~Frequency сети50 Diameter колоны60 mmdrilling capacity steel (S235JR)16 mmContinuous drilling steel (S235JR)13 mmthreading in steel (S235JR)M8Diameter пиноли60 Manus spindale 16Ход пиноли90 messejana from column to center of axle шпинделя235 mediabase скоростей50-4000 Rev/medupravlenie the control scholasticate adjust electronicallythe Size of the working table290 x 290 mmthe Size of the T-shaped пазов10 malichite T-shaped пазов2Расстояние between the T-shaped пазами100 Muradiye rolling стола360 gradesaverjoin distance, spindle -стол98 maksimalnoe distance, spindle -стол375 maksimalnoe distance, spindle-основание385 Mesmer T-slot основания14 malichite T-slot основания2Расстояние between T-slots mm основания100

On all equipment warranty 1 year, provide services for warranty and post-warranty service.

Go to the section boring machines for metal