plastic plumbing pipe 20 25 32 40 50 63 mm from the manufacturer

            Goods from producer. Possible the shipment in most of the regional centers of Ukraine.

Polietilene pipes today are effective and technologically the way to solve various engineering problems in the construction of pipelines and engineering networks. Polyethylene pipes have advantages over metal counterparts in terms of cost and technical and operational characteristics. To undoubted advantages of this material include chemical resistance, frost resistance, good response to impact, lightweight recycling, simple installation and relatively low cost. Pipe , manufactured from low density polyethylene, designed for pipelines transporting water (drinking and for household technical needs), and other liquids or gases. The production of plastic water pipe passes through a special technology using modern equipment and qualified personnel. The inner surface processed in a certain way to eliminate the negative reactions passing them by streams of water, so the polyethylene is ideal material for pipes in water supply systems.
plastic pipelines are operated much longer than cast iron, metal or concrete pipes ( warranty period polyethylene pipes is 50 years);
- do not corrode when in contact with water and various aggressive environments;
3-4 times lighter than metal, cast iron and concrete pipes;
- plastic interface requires no additional consumables such as the electrodes and insulation;
for polyethylene pipelines there is the possibility of repeated use at low cost remounting;
- easily utilized and processed if necessary;
plastic piping can be installed by the method of pulling;
- polyethylene pipes have a high elasticity;
- withstand earthquakes;
the low roughness of the inner surface TrUBAallow use the diameter at the number below while maintaining hydraulic properties pipeline;
- in pipelines from polyethylene significantly reduced the risk of of water hammer due to the relatively low modulus of elasticity of the material;
water frozen inside the pipe, does not damage it;
- pipes made of polyethylene toxicologically and bacteriologically safe;
- polyethylene pipes are easy to the service they are easily replaced and repaired;

 

Applications of PE pipes:

· For sewer systems

· For laying power cables

· On the heat as waterproofing membranes

· Forming in solid construction

· Use as structural items

· To protect electrical wiring and communication channels

· For economic-drinking water supply (water pipes and systems)

· The PE pipe is used in greenhouses (in the irrigation systems, subsurface heating plant nutrition)

Polyethylene pipe for water PN 10 f 50x3.7 mm

Polyethylene pipe for water PN 10 f 63x4.7 mm

Polyethylene pipe for water supply PN 12.5 f 20x2.0 mm

Polyethylene pipe for water supply PN 8 (blue) f 25x2.0 mm

Polyethylene pipe for water supply PN 8 (blue) f 32x2.0 mm

Polyethylene pipe for water supply PN 8 f 25x2.0 mm

Polyethylene pipe for water supply PN 8 f 32x2.0 mm

Polyethylene pipe for water supply PN 8 f 40x2.4 mm