Edge banding machine IMA ADVANTAGE 6216-2-L12 2004 century

Edge banding machine IMA ADVANTAGE 6216-2-L12 2004 century

Andautomatic machine to hang and processing edging materials for particleboard passing type. Nodes: preliminary milling face chipboard, gluing, pre-trimming edging material separate site facing, milling site straight cutters (for lining), milling node with radius cutters, node contour milling, polishing node and polishing brushes.

EQUIPMENT:

• route management

• the upper clamp with rubber rollers

• infeed chain with lining (chain conveyor)

• guards in length 1750 2200 mm...

• planing / milling unit

• infrared emitter

• unit for gluing edges

• the trimming unit

• milling unit

• multifunctional units (MFA)

• the cycle profile

• NCR flat the cycle

• polishing (grinding) unit

TECHNICAL FEATURES:

• performance ............................................. emphasis is on the left in the direction of travel billet

• edging material ............................... veneer natural, PVC rolls and strip, strips of solid wood

• the type of glue ............................................... glue melt on the basis of Sint. resins

• diameter of roll material (max) mm 860 ...

• the speed of passage of the workpieces, m/min............ 16

• the height of the edges, mm.................................. 14 ...56

• the thickness of the edges , mm .............................. 0,4 ...12

• the thickness of the plates, mm

• minimum ........................................ 8

• maximum with copier ......................... 40

• maximum without copier........................ 60

• the width of the plates (min), mm ........................... 65 (with a minimum length of 300 mm)

• the length of the plates (min), mm.............................120 (with a minimum width of 120 mm)

• section edges (max) ,mm

• Reiki .................................................. 12 x 55

• PVC .................................................... 3 x 55

• the ledge plate for chain mm ..................... 40

• compressed air pressure, bar .............. 6

• aspiration, m/s .................................... 28