The compressor WU-5/9 compressor WU-5/9 compressor WU-5/9

The compressor WU-5/9 compressor WU-5/9 - compressor WU-5/9 is designed to supply compressed air pressure to 0.78 MPa (8 kgf/cm2) of various industrial enterprises. The compressor WU-5/9 consists of the following main parts: crankcase, cylinder blocks, crankshafts, connecting rods, pistons, valve heads. refrigerator and fan. The type of compressor WU-5/9 - piston, V-shaped, four-row, four-cylinder, two-stage, simple steps. The compressor crankcase WU-5/9 compressor WU-5/9 cast, cast iron, rigid construction, has two bores for fitting crankshaft, two hatches for access to the lower heads of rods and two attachment plane at the top for cylinder installation. The pistons of the compressor WU-5/9 iron, have two o and two oil scraper rings. The cylinders of the compressor WU-5/9 compressor WU-5/9 cast iron ribbed surface, cast in pairs in blocks with flanges at the top and bottom. Box valve compressor WU-5/9 iron, divided internally by a partition separating the suction side from the pressure. Valve cover compressor WU-5/9 cast with ribs on the surface for enhanced cooling. The crankshaft of the compressor WU-5/9 of spheroidal cast iron, cast together with balances dedicated to trim compressor WU-5/9, or steel with fixed cheeks balances. At the ends of the shaft are located on one side of the pulley for fan drive, on the other hand the flywheel. On the neck of the crankshaft is located on two of the connecting rod, the upper head which is connected with the pistons I and II levels. The rods compressor WU-5/9 - stamped steel I-beam. The top head of a rod one-piece pressed with a bronze bushing. The lower detachable head with replaceable inserts or filled with Babbitt. On the lid of the bottom head set Mesopotamia tube. Refrigerator intermediate radiator type four chassis to the compressor WU-5/9 designed for cooling compressed in the first stage of the air flowing through the tubes. Created by the fan air flow washes tube outside perpendicular to the beam pipe that cools the compressed air to a temperature of 40-60 °C. the design of the refrigerator is provided by separate cover, separating each move air, which prevents heated air through the walls of the partitions. To the posts of the refrigerator to secure the diffuser in the cowl which is the impeller of the fan. A diffuser creates the direction of airflow across the surface of the refrigerator. The lower lids are attached to the tube system purge compressor WU-5/9. Valve heads I and II stage compressor WU-5/9 identical in construction and differ only in size. They consist of valve plates collected on them suction and discharge valves. The band-pass valves with semiprozines plates. It is possible to supply compressors WU-5/9 compressor WU-5/9 with relay or microprocessor automatics. The compressor WU-5/9 is installed indoors. The compressor WU-5/9 compressor WU-5/9 in packaged form or in the carrier can be transported by any mode of transport (road, rail and other). Raising the compressor WU-5/9 lifting means must be slinging for salesy or through holes in the frame. The compressor WU-5/9, spare parts, tools and accessories should be stored indoors in a package.