Ceramic roll Grinding bodies of zirconium ZrО2

Ceramic fraction is used in the manufacture of:
-varnishes and paints,
-different coatings,
-pigments,
-pharmaceutical products,
-cosmetics,
-food products,
-filling mass, and fillers.

Ceramic fraction reduces the duration of grinding, increases its quality, has high resistance to abrasion.

The use of ceramic shot to avoid the entry of impurities to grind the substance. The fraction of ceramic capable of withstanding high loads.

The fraction has high strength, smooth surface has a circular shape. Due to these characteristics, optimum results are achieved when the dispersion and grinding of paints, dyes, inks, pigments, magnetic coatings, pharmaceutical and cosmetic substances, chemicals and minerals.

ceramic shot ZIRBLAST used for treatment of various surfaces: cleaning tool, stainless steel finish and light alloys, deburring, descaling, removal of paint or coating, surface or a wet etching, is effective in roller and air systems(dry and wet)Typical chemical composition
%
ZrO2 60-70
SiO2 28-33
Al2O3 max 10


The Dimensions Of The Mark
0-0,063 W
0-0,125 V
0,063-0,125 W
of 0.125-0.250 kg 60
0,250-B40 0,425
0,425-B30 0,0600
0,600-B20 0,850


Packing: 25 kg plastic cans or big bags of 500 kg or 1 T.



Ceramic fraction chemical composition Serotyping

%
ZrO2 60-70
SiO2 28-33
Al2O3 max 10


Size (μm) Mark
150-210 Z150
210-300 Z210
300-425 Z300
425-600 Z425
600-850 Z600
850-1180 Z850


Application:

• Shot peening to increase fatigue strength, reduce corrosion, pitting, wear, micropitting-corrosion

• Formation of hardening

• Work hardening correction

Packing: 25 kg plastic cans, pallets of 50 kg and more



Ceramic shot MICROBLAST specially designed for engraving and ultra fine processing, has a high percentage of re-use and impact strength.Typical chemical composition

%
ZrO2 60-70
SiO2 28-33
Al2O3 max 10



Designation
Size range

Microblast 120
from 63 to 125 microns

Microblast 125
125 µm

Microblast 170
from 45 to 90 μm

Microblast At 205
63 microns

Microblast 400
from 30 to 63 microns

Microblast In 505
from 10 to 30 μm

Microblast At 205
63 microns


Application:

- Deburring

- Injection needle

- Electronic elements

- Etching of the surface of

The drawing figure is not glass

Fine machining and engraving

- Beauty treatments

Packing: 25 kg plastic cans or big bags of 500 kg or 1 T.