Air driven gas booster pump system equipment
Offer type: salePublished: 27.02.2015
| Price: | negotiated |
| Seller: |  Andrej |
| Phones: |  +8618206410368 Show phone |
| Address: | Russian Federation, Moscow |
Gas booster system is full of gas steering units ready for connection, which are provided for creating a working pressure up to 25MPa. It is suitable for feeding a gas.
Because the pressure is generated by means of a pneumatic pump.The electrical connection will not be necessary.
For this system, with pneumatic actuator DKS must be equipped with ventilation actuator control pressure is regulated.
The desired operating pressure can be achieved by changing the drive air pressure through the control valve. When driving air pressure and the outlet pressure to achieve balance, the pump stops, the filling pressure and the output pressure remains at a preset value.
Ideal for power supply tipping system on a railway truck
Application
Because the pressure is generated by means of a pneumatic pump.The electrical connection will not be necessary.
For this system, with pneumatic actuator DKS must be equipped with ventilation actuator control pressure is regulated.
The desired operating pressure can be achieved by changing the drive air pressure through the control valve. When driving air pressure and the outlet pressure to achieve balance, the pump stops, the filling pressure and the output pressure remains at a preset value.
Ideal for power supply tipping system on a railway truck
Application
SHINEEAST - gas booster system is ideally suited for a wide range of applications. the gas cylinders for full or the battery is charging industrial gases like argon, helium, hydrogen and nitrogen.Gas through injection molding.
Pressure and leak testing of valves, pipes and tubes, condensation pipes and coil air conditioning...
Pressure and leak testing of valves, pipes and tubes, condensation pipes and coil air conditioning...
Features：
Compact and robust design
No electromotive, but pneumatic powered intrinsically safe operation and ex-proof Pneumatic power oil free compression and clean air. No pollution may
Simple control and regulation processes because of the compressed air drive.
Rugged and reliable operation in tough working conditions. For example,
The power supply will not be damaged through wet areas, dust and high temperatures
No energy consumption after reaching the set final pressure
Low installation costs, as the simple design of components is kept to a minimum
Compact and robust design
No electromotive, but pneumatic powered intrinsically safe operation and ex-proof Pneumatic power oil free compression and clean air. No pollution may
Simple control and regulation processes because of the compressed air drive.
Rugged and reliable operation in tough working conditions. For example,
The power supply will not be damaged through wet areas, dust and high temperatures
No energy consumption after reaching the set final pressure
Low installation costs, as the simple design of components is kept to a minimum
Technical parameters
Type
GBS40
Air drive pressure
5-8bar
The maximum output pressure
32Mpa
Generation of pressure
Gas drive gas steering
The pressure ratio
40:1
Working environment
gas
Noise
75dB
Drive media
compressed air
