Hydraulics and Pneumatics from Rexroth
Offer type: salePublished: 18.02.2013
| Seller: |  Sergej |
| Phones: |  +7 920 018 70 78 Show phone |
| Address: | Russian Federation, Nizhegorodskaya Oblast', Nizhny Novgorod |
Official partner Rexroth Bosch Group
offers hydraulic and pneumatic equipment for stationary and mobile equipment
Hydraulic pumps
- Axial piston pumps designed with an angled washer and with inclined unit for medium and high pressure (V slave from 5 to 1000 cm3, R rated up to 420 bar., hydro-mechanical and electro-hydraulic control)
- Radial piston pumps for operation at high operating pressures (up to 700 bar, with control valves with a constant displacement)
- Gear pumps with external gearing (V slave from 0.17 to 56 cm3, R rated up to 280 bar, using different flanges and combinations of pumps)
- Gear pumps with internal gearing for continuous operation at pressures up to 315 bar (V slave from 1.7 to 250 cm3)
Vane pumps for low and medium pressure up to 210 bar (V slave from 18 to 193 cm3)
Motors
- Axial-piston motors with high reliability, long lifetime, low noise, high efficiency and cost effectiveness
- Radial piston eccentric motor type MR with external loading and permanent displacement of up 10802 cm3 with different directions of rotation
The cylinders
- high quality standard, industry and special performance
different sealing systems
- integrated systems for motion measurement
- with built-in contactless switches
(R slave to 4000 bar, the piston diameter from 25 to 1500 mm stroke length up to 44000 mm).
Hydraulic units and hydraulic stations
Standard compact units
- Tanks with a volume 20,40 or 60 l
- Driving power from 0.37 to 7.5 kW
- Possible extension of functions by combining units in the system
Standard units
- Tanks with a capacity from 100 to 630 l
- Drive power 5.5-45 kW
Standard units with reduced noise
- Tanks with a capacity from 100 to 1000 l
- Driving power from 7.5 to 90 kW
Aggregates of individual performance
- Design and manufacture according to customer requirements
Control device
- distributors of direct and indirect action with electromagnetic,
hydraulic, pneumatic or mechanical control methods with
different distribution circuits and operation
- pressure valve (pressure, pressure reducing, connect and disconnect
pressure)
- flow control
shut - off valves (reverse, reverse hydraulic unlocking)
- 2-way inline valves (logic elements)
Proportional technology
- proportional valves with integrated electronics with sizes from 6
to 52 for the following performances: the valves of pressure and flow, distributors
(P max 350 bar Max. volume flow - 2800 l/min)
- control valves with direct and indirect management with sizes from
6-160 (P max up to 420 bar maximum flow rate -50000 l/min)
the servo - valves with high dynamics and excellent quasistatic
parameters with sizes from 6 to 32
Electronic components, systems and accessories
- electro-hydraulic control system and regulation for axial piston pumps
- card holders and assemblies
- pressure sensors and displacement
- amplifiers for proportional valves and servo-valves
analog amplifiers and modules
- pressure regulators
Blocks and control panel
Accessories
- devices for measurement and control (pressure switch, pressure gauges, thermostats)
Filters high and low pressure
- linear filters
filters-air bleeds
filters installed on the tank/drain filters
dual filter/line switchable filter
- block filters for outdoor installation
filters suction and discharge
filters with the selection grid
- filtration system
- filter elements
Batteries and equipment
- balloon batteries from 1 to 50 l
membrane batteries from 0,075 to 2.80 l
- protection block and disable
- equipment for charging and testing
- fasteners
- safety features
the filling valve battery
Pneumatic equipment
rod and Rodless cylinders cylinders
technique manipulators and vacuum components (linear actuators, linear
guides, rotary actuators, clamps, dampers, vacuum
device)
- distribution blocks
- valves with electric, pneumatic, mechanical and manual
running
- flow regulators and other types of valves
- machinery for the preparation of the compressed air
- parts for mounting and accessories and other equipment
Seals SIMRIT and Merkel
- more than 19,000 titles: hydraulic and pneumatic seals, seals, gaskets, pumps, flat and frame seals, bellows, diaphragm, vibration isolation. The offered products provides a high degree of integrity, is characterized by reliability and long service life, thereby reducing the cost of additional bulkhead, with the exception of equipment downtime, reduced consumption of special liquids.
Hydro - and pneumatic equipment of leading foreign manufacturers: VICKERS, DENISON, HYDAC, WOERNER, DANFOSS, Parker, CAMOZZI, FESTO, SMC Pneumatic, VOITH, ARGO-HYTOS, Berarma, Star Hydraulics Ltd, etc
offers hydraulic and pneumatic equipment for stationary and mobile equipment
Hydraulic pumps
- Axial piston pumps designed with an angled washer and with inclined unit for medium and high pressure (V slave from 5 to 1000 cm3, R rated up to 420 bar., hydro-mechanical and electro-hydraulic control)
- Radial piston pumps for operation at high operating pressures (up to 700 bar, with control valves with a constant displacement)
- Gear pumps with external gearing (V slave from 0.17 to 56 cm3, R rated up to 280 bar, using different flanges and combinations of pumps)
- Gear pumps with internal gearing for continuous operation at pressures up to 315 bar (V slave from 1.7 to 250 cm3)
Vane pumps for low and medium pressure up to 210 bar (V slave from 18 to 193 cm3)
Motors
- Axial-piston motors with high reliability, long lifetime, low noise, high efficiency and cost effectiveness
- Radial piston eccentric motor type MR with external loading and permanent displacement of up 10802 cm3 with different directions of rotation
The cylinders
- high quality standard, industry and special performance
different sealing systems
- integrated systems for motion measurement
- with built-in contactless switches
(R slave to 4000 bar, the piston diameter from 25 to 1500 mm stroke length up to 44000 mm).
Hydraulic units and hydraulic stations
Standard compact units
- Tanks with a volume 20,40 or 60 l
- Driving power from 0.37 to 7.5 kW
- Possible extension of functions by combining units in the system
Standard units
- Tanks with a capacity from 100 to 630 l
- Drive power 5.5-45 kW
Standard units with reduced noise
- Tanks with a capacity from 100 to 1000 l
- Driving power from 7.5 to 90 kW
Aggregates of individual performance
- Design and manufacture according to customer requirements
Control device
- distributors of direct and indirect action with electromagnetic,
hydraulic, pneumatic or mechanical control methods with
different distribution circuits and operation
- pressure valve (pressure, pressure reducing, connect and disconnect
pressure)
- flow control
shut - off valves (reverse, reverse hydraulic unlocking)
- 2-way inline valves (logic elements)
Proportional technology
- proportional valves with integrated electronics with sizes from 6
to 52 for the following performances: the valves of pressure and flow, distributors
(P max 350 bar Max. volume flow - 2800 l/min)
- control valves with direct and indirect management with sizes from
6-160 (P max up to 420 bar maximum flow rate -50000 l/min)
the servo - valves with high dynamics and excellent quasistatic
parameters with sizes from 6 to 32
Electronic components, systems and accessories
- electro-hydraulic control system and regulation for axial piston pumps
- card holders and assemblies
- pressure sensors and displacement
- amplifiers for proportional valves and servo-valves
analog amplifiers and modules
- pressure regulators
Blocks and control panel
Accessories
- devices for measurement and control (pressure switch, pressure gauges, thermostats)
Filters high and low pressure
- linear filters
filters-air bleeds
filters installed on the tank/drain filters
dual filter/line switchable filter
- block filters for outdoor installation
filters suction and discharge
filters with the selection grid
- filtration system
- filter elements
Batteries and equipment
- balloon batteries from 1 to 50 l
membrane batteries from 0,075 to 2.80 l
- protection block and disable
- equipment for charging and testing
- fasteners
- safety features
the filling valve battery
Pneumatic equipment
rod and Rodless cylinders cylinders
technique manipulators and vacuum components (linear actuators, linear
guides, rotary actuators, clamps, dampers, vacuum
device)
- distribution blocks
- valves with electric, pneumatic, mechanical and manual
running
- flow regulators and other types of valves
- machinery for the preparation of the compressed air
- parts for mounting and accessories and other equipment
Seals SIMRIT and Merkel
- more than 19,000 titles: hydraulic and pneumatic seals, seals, gaskets, pumps, flat and frame seals, bellows, diaphragm, vibration isolation. The offered products provides a high degree of integrity, is characterized by reliability and long service life, thereby reducing the cost of additional bulkhead, with the exception of equipment downtime, reduced consumption of special liquids.
Hydro - and pneumatic equipment of leading foreign manufacturers: VICKERS, DENISON, HYDAC, WOERNER, DANFOSS, Parker, CAMOZZI, FESTO, SMC Pneumatic, VOITH, ARGO-HYTOS, Berarma, Star Hydraulics Ltd, etc
