Automatic safety CRAB-2.and Zap. part. 100UAH.
Offer type: salePublished: 22.02.2013
| Seller: |  Nikolaj |
| Phones: |  +380 (97) 1476878 Show phone |
| Address: | Ukraine |
Automatic safety regulation burning device CRAB-2 is designed for safe automatic control and regulation of thermal processes of heating boilers, gas-fired low pressure, up to 16 kW. installed in the premises.
Automatic adjusts the water temperature output from the boiler.
Automation produces the off gas from the burners of the boiler :
- in case the torch igniter;
- insufficient traction;
- emergency decreasing gas pressure;
- leaks in impulse lines of the sensor rod and flame.
Technical characteristics.
The maximum gas pressure in the network - 1800 PA.
Nominal pressure gas network - 1300 PA.
The inertial period, stop the flow of gas when the extinction of the pilot burner, not more than 60C.
Nominal heat output gas burners - 20 kW.
The nominal thermal power of the pilot burner, not less than - 1.5 kW.
Overall dimensions, mm:
height - 300
width - 450
depth - 550
We also have a gas-burning Device �Temp� 18-01. Stripping
The purpose
Gas burner device PACE intended for burning gas heaters, domestic water system, hot water heating boilers and domestic furnaces with automatic regulation and control of safety.
Apply for gasification of residential houses, when translating a previously installed heating equipment or boilers with solid fuel to natural or liquefied gas. The device has a controller universal gas RGU-M1.
Specifications:
Nominal heat output in KW. - 18;
Nominal gas pressure in the network, PA from 700 to 2000;
The temperature of the surrounding air, �from -2 to +70
The range of temperature control fluid, �from 50 to 90
The underpressure in the furnace, PA from 2 to 15;
The time of ignition of the gas at the main burner with not more than 2
On-time in a job, with no more than 60
Time off when flame out, with not more than 60
Time off in the absence of vacuum in the furnace, with not less than 10, no more than 60
Mass, kg, not more than 12
Cm. INF. - http://inforico.com.ua/userads/1349956061688003/
Automatic adjusts the water temperature output from the boiler.
Automation produces the off gas from the burners of the boiler :
- in case the torch igniter;
- insufficient traction;
- emergency decreasing gas pressure;
- leaks in impulse lines of the sensor rod and flame.
Technical characteristics.
The maximum gas pressure in the network - 1800 PA.
Nominal pressure gas network - 1300 PA.
The inertial period, stop the flow of gas when the extinction of the pilot burner, not more than 60C.
Nominal heat output gas burners - 20 kW.
The nominal thermal power of the pilot burner, not less than - 1.5 kW.
Overall dimensions, mm:
height - 300
width - 450
depth - 550
We also have a gas-burning Device �Temp� 18-01. Stripping
The purpose
Gas burner device PACE intended for burning gas heaters, domestic water system, hot water heating boilers and domestic furnaces with automatic regulation and control of safety.
Apply for gasification of residential houses, when translating a previously installed heating equipment or boilers with solid fuel to natural or liquefied gas. The device has a controller universal gas RGU-M1.
Specifications:
Nominal heat output in KW. - 18;
Nominal gas pressure in the network, PA from 700 to 2000;
The temperature of the surrounding air, �from -2 to +70
The range of temperature control fluid, �from 50 to 90
The underpressure in the furnace, PA from 2 to 15;
The time of ignition of the gas at the main burner with not more than 2
On-time in a job, with no more than 60
Time off when flame out, with not more than 60
Time off in the absence of vacuum in the furnace, with not less than 10, no more than 60
Mass, kg, not more than 12
Cm. INF. - http://inforico.com.ua/userads/1349956061688003/
