biodegradable grease for forms and formwork

BIODEGRADABLE GREASE FOR FORMS AND REMOVING BISMOL-1

(to be in accordance with the requirements of GOST 1510)

 

Biodegradable grease Bismol-1 - the ecologically clean new generation product developed on the basis of natural oils scientists of our company.

                  Bismol-1 is a mixture of vegetable the oils, emulsifiers and special additives. The main consumers Bismol-1 has enterprises for the production of concrete products, foam blocks, aerated blocks, paving, fences and construction companies using Biomol-1 to lubricate the casing.

                   Tests conducted at the enterprises confirmed the main advantages of Biomol-1

before the emulsion are considered and other greases of petroleum products:

- environmentally friendly (not injurious to health; does not require special conditions of utilization, has not harmful effects on the environment);

- efficiency (there is no need to have a post the preparation of the emulsion, lack of energy costs in production, pumping, stirring the emulsion, low consumption grease (1l 30-40m2 surface);

- wide range of application (for all kinds of shapes, forms are made from metal, plastic, wood and rubber well is kept horizontal and the most recent vertical surfaces, can apply to hot foRMI, is applied on the vibrating table);

- withstands temperature extremes (you can use open interest in all weather conditions (winter to -10 ° C), works fine after defrost);

- advantageously differs easy to use (does not require additional preparation prior to use, easy to apply spray, brush, roller);

- interacts well with product (non-staining , creates high-quality, smooth and without a porous surface);

- it has anti-corrosion properties (no adverse effects on forms and formwork).

               Before import analogues significant advantage in price with the same lubricant consumption.

Meets TU 2507810617.001-04

Figure

Standard

Control

Density at 20 ° C, kg/m3, not less

850

GOST 3900

Acid number, mg KOH per 1 g of the product, not more

10

GOST 5985

Kinematic viscosity at 40 ºC, mm2/s, no more

600

DSTU GOST 33

                    Bismol-1 be supplied as concentrate. Bismol-1 can be applied to the form in concentrated form and can be diluted with diesel oil. The proportion of breeding oil 1:1, but the proportion may be selected empirically for a specific production (you can increase the number of diesel fuel and thereby reduce the cost of the grease).

Optional customer Bismol-1 can be supplied in ready-made.

                  Packaging Bismol-1 made in accordance with the requirements of GOST 1510. Bismol-1 Packed in the shipping container. As transport packaging used barrels e