Toskar Alumaster 200 Machine for filing, and drilling aluminium profiles

Machine for filing, and drilling aluminium profiles

TOSKAR Alumaster 200 intended for filing, and drilling at an angle of 45° in the vertical plane of aluminum profiles,

used in the manufacture of furniture.The desired length of the workpiece is set by using moving right caliper

and a ruler with mm-scale. Filing occurs simultaneously from both sides, after this cycle is the cycle of drilling holes for

layout. On each of both sides of the workpiece drilled one hole.

The working tool is a drill. Due to the fact that filing, and drilling is for one setting of the workpiece, to achieve high accuracy in

further the connection of workpieces

Protection system in accordance with CE standards;

Two of the saw blade;

Two drill;

Two vertical pneumatic clamping;

Cutting heads: one mobile, the second stationary.

Manual positioning of the right caliper;

Read sizes through ruler with mm-scale;

Pneumatic control lowering of the saw blade;

Pneumatic control movement of the drilling head;

One working cycle for 10-15 seconds.

Specifications:

E ectro power 380 V, 50 Hz, 3 Ph

E ectra engine and Pilin s disks 2×1.1 kW, 4500 rpm

E ectra engines drilling x groups 2×0.55 kW, 3000 rpm

Pilins drives 200×30 - 2 pieces

Min./Max. workpiece length mm 190/2000

Max emaline the cross-section of the workpiece 80×30 mm

The necessary air pressure of 6-7 Bar

Machine dimensions 800×2900×1500 mm

Weight 330 kg

The full list of machines in this series
http://www.kami.com.ua/catalog/82/9/3/447