energy saving technologies,energy saving,energy saving device,energy saving system,energy saving device

The problem of energy costs

1. The constant increase of tariffs

Due to the constant growth rates energy costs regularly increase. And over the years, this situation will not improve.

2. The growth of electricity consumption

When the increase of electricity consumption (for example, when expanding production, adding electrical equipment and appliances) existing transformer substation't stand growing on them load. This leads to the costly process of replacing the equipment.

3. High inrush currents

In the moment you start the motor consumes 6-8 times more energy than the normal operation mode. This problem is partially cope traditional "soft start system". However, to equip them all the engines on the enterprise is very expensive.

4. Poor power quality

Large consumers that their work worsen the already low characteristics of power systems (cos φ), which negatively affects all the consumers of this network.

5. Loss in cable networks

Only in intrasite cable networks enterprise energy losses average 3-4%. And this is without taking into account losses on technological equipment.

The situation is compounded by the fact that the parameters of the electric power in the enterprise network is far from perfect.

Differences from ULTRA traditional technologies

1. ULTRA / Soft Start System

In unlike traditional systems soft start (PSC) motors, which allow at the time of start of the engine to reduce the consumption of power technology provides ULTRA power savings not only at the time of engine start, but also during the whole period operation of the equipment.

2. ULTRA / reactive power Compensator

In the contrast settings of reactive power compensation (the plant), which compensating reactive power reduces the load on transformers, and to reduce losses in the wires, ULTRA not direct effect on the power factor (cos φ) in the network of the enterprise, and provides power savings for all kinds of load, regardless of what the characteristic cos φ in this network.

However, ULTRA marginally improve the power factor, but this is only as an additional benefit ULTRA.

3. Filters of higher harmonics

The ULTRA is not intended directly for filtering harmonic distortion of voltage and current existing in the network.

However, the polarization effect (straightening axles spin) of the electrons allows to reduce the level of harmonic distortion by 7-10%, thereby reducing the harmful impact that these distortions to work electrical equipment (especially electronic equipment), isolation cables and their life in General.