Gate valve cast iron TJS 250 hydraulic

We produce cast iron gate valve TJS 250 with hydraulic oil station.

Valve TJS 250 hydraulic HZ 80*40*270.

The oil station GSG,5 - 0.75 W-0,37 -10-1, V=10l.

High-pressure hose - 2 PCs L=10m.

Technical characteristics

1. Pressure the nominal MPa -25

2. Pressure maximum, MPa -28

3. Pushing the force on the rod, kN -125

4. Pulling the force on the rod, kN -94

Manufactured of cast iron gate valve with protective lining of the flowing parts of silicon carbide, actuated valves, pneumatic actuator.

TJS - Flow part and the valve gate is made with a protective elements of the monolithic polycrystalline silicon carbide (IPC). DN 150, 200, 250, 300.

SCSM - Flow portion of the valve is made with a protective elements of the monolithic polycrystalline carbide silicon (IPC), heavy duty stainless steel gate. The operation mode is "Open", "Closed". Do 80, 100, 150, 200, 250, 300.

TJS electric - operate valves in shut-off and control mode. DN 150, 200.

SCCM electric - Valves with SCSM the drive is designed to operate in the "Open" or "Closed". DOO DOO 80, 100, 150, 200, 250, 300, 400

Valve slurry ZS 800 - management System to ensure all electrical protections and remote control - 1, adapted to the ACS system. The flow area 800mm.

SCCM 150 with pneumatic control - Flow part of the valve is made:

- with protective elements of monolithic polycrystalline silicon carbide (IPC), with substantially greater wear resistance compared to metal

- rubber with a hardness of shore a - 80, which is close in hardness to poliuretano.

The gate is made of stainless steel 12X18H10T of GOST 5632-72.

Produce customized equipment according to customer's drawings, plasma cutting, punching, precision metal bending, milling, fur. machining, turning, metal, casting, casting. Call!