Will sell the pump unit of the CNS(g) 13-280 from official dealer

Pumps CNS (g) 13-280 are designed for pumping neutral hot water temperature from 45 to 105°C

For pump shaft seal is used, the seal having a cross-section of a square of side 10 mm Packing impregnated anti-friction composition.

Rotor supports two radial bearing spherical shape. The bearing brackets on a sliding fit, which allows the rotor to move to the value of the "progress" of the rotor in the axial direction.
The output of the pump shaft from the bearing housing is sealed by the cuff.

Pumps CNSG include a number of sections (2 to 10). The section consists of the impeller, casing, guide vanes, guide vanes.
The multistage design CNSG Sectional centrifugal pumps modifications CNSG 13-280 - gorizontalnye, complete sections from 2 to 10 pieces

Pump modifications CNSG 13-280 consists of a housing and rotor. Case includes: cover suction and discharge pipes, brackets, building and directing apparatus with the alignment apparatus.

The rotor includes a shaft with impeller, drive hydraulic heel and spacer sleeve.
13-280 allows using not change the number of impellers, guide apparatov, to change the pressure of the pump without changing the feed rate.
The pump part of the unit and the electric motor are installed on a single base plate. The horizontal variance when setting must be greater than 0.3 mm to 1 m, and the deviation in alignment of the axis of the shafts of the pump and motor may not exceed 0,05 mm

Designation pump: CNS (g) 13-280, where
• C-centrifugal
• N-pump
• - Sectional water to 45 °C
• 13 - rated flow, m3/h
• 280-head, m,
• g - for water up to 105 °C