Will sell the pump unit of the CNS(g) 13-350 from official dealer

Pump CNSG 13-350 Horizontal, sectional centrifugal multistage pump, the main purpose of which consists in pumping Hincesti not active with respect to the material flow of the pump process water, and other explosion-proof liquids similar to water in density, viscosity, and other characteristics (properties) with PH value ranging from 7 to 8.5.
The pump 13 CNS 350, is used for pumping industrial water containing solids in amounts of not more than 0.1% by volume and particle size of not more than 0.2 mm

The temperature of the fluid, Pumps CNS-350, CNSG-350 have the difference.

Pump CNS 13-350 pumping water with a temperature from 0 to had.With
Pump CNSG 13-350 pumping water with a temperature of 45 deg.C to 105 deg.With, at the same time, applied to the pumps CNS 350 JSC POS" there is a possibility of pumping water with temperatures ranging from 0 to 105 deg.With the addition of cold water in the front and rear brackets for cooling the bearings. Pump CNS differs from the pump CNSG the first features self-priming. This condition is achieved due to the installation inside the pump valve. Other parts and components pumps CNSG 13-350 and CNS 13-350 similar. In order to exclude from the operation of the valve in the pump CNS 350 need to shut down the hole leading to the valve.

Conditions for normal operation of the pumps CNS 13 350, CNSG 13-350
Pumps CNS stable and lasting work pressurized 2-6 m In the absence of backwater at the entrance, cavitation quickly destroys these high-speed pumps. When you install them for pumping water with a temperature of over 45°C it is necessary to increase the back pressure at the entrance to the us