Will sell the pump unit of the CNS (g) 38-198

Pump CNSG 38-198 is necessary for pumping neutral cold and hot water up to 105°C with a minimum content of abrasive impurities (maximum of 0.21% by weight and size of solid particles not more than 0.22 mm), thus the supply of water to the pump must be pressurized more than 10 meters century Art.
The housing section pump CNS(g) form separate sections (chambers), the number of which is less than the number of impellers per unit, as the first wheel is located in the front cover of the pump. The pump head will be equal to the sum of pressures created by the impellers. However, a single impeller series CNSG gives the pressure of 22m. water.article The impellers are placed in one housing and are mounted on the same shaft.
A constructive solution pump allows you to increase or decrease the pressure, keeping the nominal flow.
These pumps are widely used for pumping water in coal mines directly in water supply systems, and hydraulic systems to create and maintain pressure.

Case mnogostupenchatogo sectional pump consists of separate sections (chambers), the number of which is equal to the number of impellers minus one, as one wheel is located in the front cover. The sectional construction of the pump casing allows you to increase or decrease the pressure without changing the feed. The head is equal to the sum of pressures generated by each impeller.
In multi-stage pumps the flow of the fluid is transferred successively with multiple impellers mounted on the same shaft, in the same housing.
Conditional obanacare:
CNSG 38-198:
Canterberry pump sectional hot water
submission - 38 m3/h;
head - 198 m
Can be equipped with e/d ex.
Pumps manufactured by Russia and Belarus.