The technical plates (rubber) TMCs MBS

The technical plates GOST - 7338-90 for the manufacture of rubber products, which are used for static seals, prevent friction between the metal surfaces, for the perception of single shock loads, and as linings, floorings, and other sealing products.
Issued the following types of technical plates:
•oil-resistant and teploproizvoditelnosti;
Depending on the purpose, structure and method of manufacturing release several brands:
The degree of hardness:
M - soft,
C - average,
T - solid
Species: tin - tin in sizes from 10-40mm size 500 × 500 mm, 1000 x 1000 mm In this group of products includes species molded products manufactured molded in a special way molds under pressure for various branches of national economy.
non -- non -- (web) - size of 1.0 to 8.0 mm., the size of the width of 1300 mm., Bay 50kg. This group of products includes products manufactured by extruding rubber composition through a Spinneret and subsequent vulcanization without forms (in vulcanizing boiler or on the continuous vulcanization lines).
Tmcm - talonrakentamisessa
Area of application: for the manufacture of rubber products, which are used for static seals, prevent friction between the metal surfaces, for the perception of single shock loads, and as linings, floorings and other sealing compounds.
Working environment: indoor Air, tanks, vessels, nitrogen, inert gases at a pressure of from 0.05 to 0.4 MPa or fresh water, marine, industrial, wastewater without organic solvents and lubricants; the salt solution with concentration up to the saturation limit; acid, alkali concentration of not more than 20% at a pressure of from 0.05 to 10.0 MPa. Temperatures from -45°C to +80°C.
MBS - oil and petrol resistant
Area of application: for the manufacture of rubber products, which are used for static seals, prevent friction between the metal surfaces, for the perception of single shock loads, and as linings, floorings and other sealing compounds.
Working environment: indoor Air, containers, vessels, inert gases at a pressure of from 0.05 to 0.4 MPa or oil, fuel oil based gasoline at a pressure of from 0.05 to 10.0 MPa; nitrogen. Temperature: from -30°C to +80°C. Talonrakentamisessa TMCs Oil and Petrol resistant MBS rolled and shaped Different thickness:1mm-50mm Production in Russia,Ukraine and China....