Will sell the pump unit of the CNS (G) 105-at official dealer

Type: horizontal centrifugal multistage. CNS pumps move the flow of the fluid with multiple impellers, sequentially mounted on the same shaft, in the same housing. In the case multistage pump has separate sections equal in number to the number of impellers minus one, because one wheel is located in the housing cover. The sectional construction of the pump casing allows you to change the pressure of the fluid without changing the feed. In practice the pressure is equal to the sum of pressures generated by each impeller. It should be emphasized that the CNS pumps stable and lasting work with prop 2...6kgs/cm depending on the performance of pumps CNS can be used in municipal and agriculture, in the food industry, in coal and mining industry, in the oil and heat power industry and in other industries.

Environment:
Pumps cipacs are designed for pumping water with pH value of 7-8,5, with a mass fraction of mechanical impurities not more than 0.1% and the size of solid particles not more than 0.1 mm and temperature of the pumped water from 1 to 45 º C.

Pumps CNSG are designed for pumping water with pH value of 7-8,5, with a mass fraction of mechanical impurities not more than 0.1% and the size of solid particles not more than 0.1 mm and temperature of the pumped water from 45 to 105ºС.

Pumps CNSM are designed to work in the oil system turbine generators. The working fluid is oil turbine T22. Working temperature range from 2 to 60'C.

Pumps CNSK are designed for pumping neutral and acidic water with pH value of 3.5 to 8.5, with a mass fraction of mechanical impurities not more than 0.2% and the size of solid particles not more than 0.2 mm and temperature of the pumped water from 1 to 45 º C.

Pumps CNSN are designed for pumping of flooded gas and crude oil with temperature from 1 to 45 º C in gathering systems and transportation of oil inside the craft. The maximum temperature of the pumped oil is not more than 60 ° C under the condition of forced cooling of the bearings.

Materials: the material of parts of the flow - grey cast iron, pump CNSK - chromium-Nickel steel; shaft seal - gland or mechanical

Name: CNS(G)And 105-441
Trim engine: air 355S2 250 3000
Flow(m3/h) head(m): 105 441
Weight, kg 2506
Dimensions: 3065 1075 1095 mm