Silicone platinum and tin silicone,molding silicone,silicone for moulds

Molding silicone for casting forms (flexible rubber forms a Transparent, high-strength molding silicone for casting forms (flexible rubber molds for casting of polyester and epoxy resins, wax, plaster, etc. Molding silicone is used for a detailed reproduction of figurines, artistic products, etc working temperature range is from -60°C to 250°C. a two-component material (compound) comprising a base (paste) and hardener (catalyst), curing after mixing to a rubbery state at room temperature. The platinum silicone and silicone tin: 1. Platinum silicone,the composition he 1A:1B or 1A:1B.Component A flowable liquid silicone and part b curing agent(catalyst) platinum.In hardness from 30-40A.These silicones environmental, odorless and nontoxic. 1).Has good elongation,tensile strength, minimal shrinkage,resistance to acid and alkali,aging resistance,longer life. 2).Used for detailed reproduction of figurines, art items 3, etc.).Working temperature range is from -60°C to 250°C. can be Cured at room temperature or by heating. 2. Tin silicone in the composition 100A:(2-5)B,component A flowable liquid,part b is overediting on the tin. These silicones can not be applied in the food industry,with reserve not environmental.Hardness 10-40A. 1).It is used to create forms(molds) polyurethanes, polyester resins, plaster, wax, paraffin wax, gypsum, concrete, liquid plastics, Soaps. For the production of Souvenirs sculptures, statuettes and other Handicrafts 2).Has high fluidity and low viscosity and easy operation,strong breaking strength,strong resistance to deformation,resistance to high temperatures, reusable duplication, resistance to acid and alkali, aging resistance, long life. 3).Operating temperature from-60°C to 250°C. the curing Temperature only at room temperature. 3. Unlike tin silicones and platinum are characterized by high strength and mechanical properties. This mold can be used to work with polymer clay, cement, casting candles and Soaps, etc., This silicone is flexible enough to easily extract the product, and firm enough to be easy to use with aluminise materials, such as polymer clay. Each mold is made by hand and tested for quality print. Mold is very durable and will serve You for years if you treat it carefully. It can be washed with water and a brush with detergent (if necessary). Any questions You can contact me! Contact Person: Dmitry