Sanitary pumps centrifugal pumps for waste mass type CM

The company "PRO-M" will deliver on the best conditions in a short time from a warehouse and under the order:
The design and purpose of
Pumps for waste masses of CM type centrifugal, horizontal, cantilever Salnikov shaft seals. Designed for pumping of municipal and industrial waste mass, which contain large amounts of impurities. Flow channels of the pump are wider than the channels of pumps, pumping clean fluid.
Pumped liquid
Urban and industrial waste mass and other non-corrosive liquids with density up to 1050 kg/m3 pH = 6-8.5, with temperatures up to C (80°C) and containing abrasive particles of size up to 5 mm, no more than 1% by weight. The maximum concentration of the pumped mass of 2%. Limit the concentration of gases in the medium being pumped 5%.
Legend
SEE 80-50-200 NF4 TU-06-1672-95
where CM - waste-massin;
80 - the diameter of the inlet, mm;
50 is the diameter of the outlet, mm;
200 - impeller diameter, mm;
NF climatic version;
4 - placement category.
or 100-65 CM-200A UHL TU-06-1672-95 is the same, the trimming of the impeller outside diameter.
Designation of the unit must contain an indication about the frequency of rotation.
SEE 80-50-200-2 NF4 TU-06-1672-95
SEE 100-65-200-4 NF4 TU-06-1672-95
SEE 150-125-315-6 NF4 TU-06-1672-95
where the last digit corresponds to the frequency of rotation:
2 - p sync.= 48,4 s-1 (2900 rpm);
4 - p sync.= 24,2 s-1 (1450 rpm);
6 - p sync.= 16,0 s-1 (960 rpm);
Conventions on the graphical characteristics:
Q - flow, m3/h;
H - head, m,
N - power consumption, kW;
n - rotational speed, Rev/min;
- Efficiency, %;
- allowed positive suction head, m,
Products factory performance, has all necessary certificates and documents.
Has a progressive discounts for regular customers. Waiting for your requests.
Maya Y.
LLC "PRO-M" , Izhevsk
phone/Fax: (3412)790-593
phone: (950)830-5845, (912)449-5705
e-mail: meiya07.74@mail.ru
www. ppuaadpm.ru
www. oooprofi-m.ru