Sale of Shift Cars based on ZIL-131, KAMAZ, KRAZ

Please consider our offer for the supply Shift Cars based on ZIL-131 with diesel engine D-245.9, KAMAZ and KRAZ, in the so-called "swamp" variant, i.e. cross-country truck.
At will of the customer it is possible the reconfiguration of Salon - armchairs, berths, little tables and so on.
Cost of machine-set is from 40 000 USD on terms FOB, Odessa, Ukraine.
The machine-set can be supplied in unassembled for the subsequent Assembly on place.
Description of Shift Car:
Internal dimensions of the van:4900х2400х1800 (LхWхH).
Type body van: Sandwich-panel is multilayer, whole, seamless, its thickness is 38 mm, consists of:
– fiberglass reinforced plastic FRP («Optiplan GmbH», Germany);
– extruded polystyrene;
– water-resistant plywood;
– fiberglass reinforced plastic FRP («Optiplan GmbH», Germany);
– inside of the panel use fiberglass vertical amplifiers.
Type van:KUNG (without bevels in top of side panels).
Framing van: anodized aluminum profile.
Base van («subframe»): brewed from the longitudinal spars and cross beams, galvanized by hot dip galvanizing.
Flooring
base van
Sandwich-panel - floor panel 80 mm, consists of:
– fiberglass reinforced plastic FRP («Optiplan GmbH», Germany), protects the base of floor panel against corrosion;
– water-resistant plywood;
– extruded polystyrene;
– water-resistant plywood.
Covering:
floor van:“autolin” (transport linoleum).
Corners and baseboards: made of aluminum.
Battens: made of aluminum corner.
Seats: 24 pcs., soft, fabric / made of velours with the lap seat belts.
Doors in the van: side door on the right side of KUNGa:
single-wing door, swing, width 700 mm with an opening angle 180 degrees.
back door (emergency exit):
single-wing door, swing, width 700 mm with an opening angle 180 degrees.
Access in the van:
extending ladder (stairs are covered with corrugated aluminum) under side and rear doors, handle on the inside of the door opening.
Doorsill: aluminum under the doors.
Windows in the van:
Type and quantity: 5 windows (3+2) have the size 750x550 mm (sliding), on side panels and one window has the size 300х380 mm – in the side door and one window has the size 300х380 mm in the rear door.
Implements: door handle (stainless steel).
Lighting:
interior: dome lights (powered by the mains of shift car).
external: top and side marker lights (powered by the mains of shift car).
Quantity of side marker lights on both sides of the van is 6 pcs.
Other equipment: plastic wing flaps, door locks in the open position, heater Promotronic (works on diesel fuel), hatch in the roof of the van, intercom with driver.
Warranty for the machine-set is 24 months.
Vadim R. Shvits
Director
“VIVA ASSISTANCE” LLC