The recording device KCM-1

Potentiometers XM are designed to measure, record, alarm (regulation) temperature and other variables, change the values of which can be converted to a change in DC current, DC voltage and resistance.
Devices XM - single point. The readings are counted by means of a pointer on a scale, and record (nepreryvnaya) - on a tape diagram.
Balanced bridges XM are bundled with thermopropionicum soprotivlenie standard calibration.
Modification of equipment:
001, 002, 003, 004, 005, 006, 007, 008, 033, 034, 035, 036, 037, 038, 039, 040, 041, 042, 043, 044, 045, 046, 047, 048, 049, 050, 051, 052, 053, 054.
For signaling (control) and remote transmission of the measured parameter in the devices can be built:
a) positional signaling (control) device with two or three contact switches and with two or three pointers.
b) a unit with a 100% proportional band for P, PI, PID controllers.
in) rheostatic device to duplicate the readings (DPP).
g) rheostatic device software ROUX.
Accuracy class of devices to 1.0.
The main error of the instrument readings, expressed in % of the normalizing value should not exceed +of-1.0.
Passing a pointer device see scale of not more than 2.5, and 5 depending on the modification.
The speed of advancement of diagramming tape any of 10, 20, 40, 60, or 120 mm/h
The error rate of advance of diagramming tape at a voltage of 220 V and frequency 50 Hz no (+- 0.5% of set speed.
The power circuit of the unit from the mains AC voltage of 220 V, 50 Hz (special order from the network with a frequency of 60Hz)
The power consumed by the device must not exceed 16 VA.
Long scale and width diagrammes tape 100 mm
The thickness of the line write-0.6 mm
Overall dimensions of the device HH mm
Weight of the device does not exceed 12.5 kg
The service life is not less than 10 years.