Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  electrical survey units

The device registration KSU-1 Potentiometers XU

Offer type: salePublished: 01.03.2015
Price:1 700 UAH
Company:Interservis
Seller:Dmitrij
Phones:
Show phone
Write a message
Address:Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk

Potentiometers XU are designed to measure, record, alarm (regulation) temperature and other variables, change the values of which can be converted to a change in DC voltage DC and active resistance.

Devices XU - single point. The readings are counted when using the pointer on the scale, and record (nepreryvnaya) - tape the diagram.

Potentiometers CSU work, complete with converters thermoelectric standard calibration, radiation telescopes thermometers, EMF sensors or DC voltage.

Modification of equipment:

001, 003, 005, 007, 002, 004, 006, 008, 009, 011, 013, 015, 010, 012, 014, 016, 041, 042, 049, 050, 043, 044, 051, 052, 045, 046, 053, 054, 047, 048, 055, 056, 057, 058, 071, 072, 059, 060, 073, 074, 061, 062, 075, 076, 063, 064, 077, 078, 065, 066, 079, 080, 067, 068, 081, 082, 069, 070, 083, 084

For signaling (control) and remote transmission of the measured parameter in the devices can be built:

a) positional signaling (control) device with two or three contact switches and with two or three pointers.

b) a unit with a 100% proportional band for P, PI, PID controllers.

in) rheostatic device to duplicate the readings (DPP).

g) rheostatic device software ROUX.

Accuracy class of devices to 1.0.

The main error of the instrument readings, expressed in % of the normalizing value should not exceed +of-1.0.

Passing a pointer device see scale of not more than 2.5, and 5 depending on the modification.

The speed of advancement of diagramming tape any of 10, 20, 40, 60, or 120 mm/h

The error rate of advance of diagramming tape when the voltage 220 V and frequency 50 Hz no (+- 0.5% of set speed.

The power circuit of the unit from the mains AC voltage of 220 V, 50 Hz (special order from the network with a frequency of 60Hz)

The power consumed by the device must not exceed 16 VA.

Long scale and width diagrammes tape 100 mm

The thickness of the line write-0.6 mm

Overall dimensions of the device HH mm

Weight of the device does not exceed 12.5 kg

The service life is not less than 10 years.