The devices detecting RP, RPM, RPM, RP-HELL
Offer type: salePublished: 01.03.2015
| Price: | 2 000 UAH |
| Company: | Interservis |
| Seller: |  Dmitrij |
| Phones: |  099-661-64-37 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
- The devices detecting RP, RPM designed to measure and check the voltage and constant current, and other non-electrical parameters (temperature, pressure, flow, and so on), converted into electrical signals of voltage and constant current or active the resistance. Check the equipment is in rectangular coordinates on the ribbon diagram.
- Devices designed to work with thermocouples resistance, thermoelectric converters (thermocouple), sources of output signals DC.
- Devices, in the presence of signalling devices, provide
an alarm deviation of the measured parameter from the set value in
the range from 5 to 95 % range scale. The operating principle of the alarm -
contact closure alarm devices. Power, switched
output circuits signaling devices, resistive load:
a) the DC - 220, DC - 0,23;
b) AC voltage - 220 V, AC current is 0.5 A.
For inductive load - соsφ=0,4. - On the instrument - panel.
- The type of climatic performance of devices: NF4.2 or 04.2:
- NF4.2, the ambient temperature from 5 to 50°C, relative humidity 80 % at 35°C and lower temperatures without moisture condensation;
- 04.2, the ambient temperature from 1°to 50 ° C, relative humidity of 98 % at 35°C without condensation. - In devices of the type B, RPM may be proportional current output that converts the input value in uniform output current signal (0-5V, 4-20mA).
- In devices of the type B, RPM provided integrating devices: with built-in pulse counter and pulse output to the external counter.
