The switchs could feed box-100 IP54

Switchs could feed-100 is used to divide and protection of electrical circuits using switch and three 100 amp fuses. The switch applies type BP, with dosagecialis cameras, breaking and enable extinguish the electric arc resulting from the construction of the copper knives. Fuses use with the melt rate of not less than 100A, type MO, which are inserted into the copper holders, allowing the output of the fuse, make a quick replacement. Box switchs could feed 100 use in industrial plants, construction, crane equipment and other facilities.

In modern construction, industrial plants and enterprises, to break the electrical circuit and overload protection, and short circuit - use a box bursting with fuses switchs could feed. Rated power box gap can be 100A, 250A, 400A and 630A. In accordance with the installation set the switch gap VR, with arc-quenching chambers corresponding to the power amps. The handle of the switch is carried on the outer side wall of steel that allows you to quickly and safely without having contact with energized parts of the device to de - energize the electrical line. Interrupter chamber protects the switchs could feed and the entire object from the fire, in case of the electric arc at the end of a knife switch. After BP in metalwork install removable fuses, type MO or DNF fuse of that denomination. The fuses are mounted in the holder and in case of their failure, easily replaced. Due to the simplicity of construction and a minimum number of low voltage equipment: metal, switch and three fuse box gap is widely used in networks at different levels.