The cylindrical two special crane type W2-250, W2-300, W2-350, W2-400, W2-500, W2-650, W2-750, W2-1000

Purpose.

Gearboxes are used in the mechanisms of load-lifting machines, as well as can be used to drive other cars in the range gear ratios from 8 to 50 in intermittent modes loading.

Conditions of use:

• rotation of the shaft in both directions;
• climatic conditions U, T, placement category-2,3 according to GOST 15150;
• non-aggressive environment, moderate dustiness and humidity;
• the speed of the input shaft is not more than 1500 rpm

Example gear when ordering:

W2 - 200 - 20 - 12 - TP N1

N1 - climatic and category placement
TP - version with cylindrical end of input and output shaft, respectively,
12 is a variant of the Assembly
20 - nominal gear ratio
200 - center distance
W2 - type gearbox

The cylindrical two-stage horizontal special crane type C-2 are designed to use drives of the lifting mechanism and the lifting movement cranes and other machines and are used in the following conditions:

• Load constant and variable one direction and reversible;

• Working with periodic stops (intermittent mode), can operate;

• Rotation of the shafts in any side;

• The speed of the input shaft must not exceed 1500 rpm with a limit peripheral speed gear gear 12 m/s;

• The atmosphere of the types I and II according to GOST 15150 if airborne dust is not more than 10 mg/MoH;

• Climatic performance: U, T according to GOST 15150-80;

• Category of accommodation: 2, 3 GOST 15150.

• load constant and variable one direction and reversible;

• work periodic stops (intermittent mode), Pets

• long-term work;

• rotation of the shafts in any side;

• the speed of the input shaft must not exceed 1500 rpm with restriction ring

• speed gear 12 m/s;

• the atmosphere of the types I and II according to GOST 15150-69 with dusty air is not more than 10 mg/MoH;

• climatic performance: U, T according to GOST 15150-69;

• category of accommodation: 2, 3 GOST 15150-69.